16 CFR Subpart A - Subpart A—The Standard
prev | next
- § 1209.1 Scope and application.
- § 1209.2 Definitions and measurements.
- § 1209.3 General requirements.
- § 1209.4 Test procedures for determining settled density.
- § 1209.5 Test procedures for corrosiveness.
- § 1209.6 Test procedures for critical radiant flux.
- § 1209.7 Test procedures for smoldering combustion.
- § 1209.8 Procedure for calibration of radiation instrumentation.
- § 1209.9 Labeling requirement.
- § 1209.10 Certification and enforcement.
- § 1209.11 Effective date.
- Figure 1 to Subpart A of Part 1209—Partial Insulation Preparation Apparatus
- Figure 2 to Subpart A of Part 1209—Cyclone Receiver Weldment
- Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side Elevation
- Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
- Figure 5 to Subpart A of Part 1209—Zero Reference Point Related to Detecting Plane
- Figure 6 to Subpart A of Part 1209—Dummy Specimen in Specimen Holder
- Figure 7 to Subpart A of Part 1209—Specimen Tray
- Figure 8 to Subpart A of Part 1209—Standard Radiant Heat Energy Flux Profile
- Figure 9 to Subpart A of Part 1209—Flux Profile Data Log Format
- Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log Format
Authority: