29 CFR Subpart H - Subpart H—Hazardous Materials
- § 1910.101 Compressed gases (general requirements).
- § 1910.102 Acetylene.
- § 1910.103 Hydrogen.
- § 1910.104 Oxygen.
- § 1910.105 Nitrous oxide.
- § 1910.106 Flammable liquids.
- § 1910.107 Spray finishing using flammable and combustible materials.
- § 1910.108 [Reserved]
- § 1910.109 Explosives and blasting agents.
- § 1910.110 Storage and handling of liquefied petroleum gases.
- § 1910.111 Storage and handling of anhydrous ammonia.
- §§ 1910.112-1910.113 [Reserved]
- § 1910.119 Process safety management of highly hazardous chemicals.
- § 1910.120 Hazardous waste operations and emergency response.
- § 1910.121 [Reserved]
-
Dipping and Coating Operations (§§ 1910.122 - 1910.126)
- § 1910.122 Table of contents.
- § 1910.123 Dipping and coating operations: Coverage and definitions.
- § 1910.124 General requirements for dipping and coating operations.
- § 1910.125 Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C).
- § 1910.126 Additional requirements for special dipping and coating operations.
Authority:
Sections 4, 6, and 8 of the Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, 657); Secretary of Labor's Order No. 12–71 (36 FR 8754), 8–76 (41 FR 25059), 9–83 (48 FR 35736), 1–90 (55 FR 9033), 6–96 (62 FR 111), 3–2000 (65 FR 50017), or 5–2007 (72 FR 31159), 4–2010 (75 FR 55355) or 1–2012 (77 FR 3912), as applicable; and 29 CFR part 1911.
Sections 1910.103, 1910.106 through 1910.111, and 1910.119, 1910.120, and 1910.122 through 1910.126 also issued under 29 CFR part 1911.
Section 1910.119 also issued under Section 304, Clean Air Act Amendments of 1990 (Pub. L. 101–549), reprinted at 29 U.S.C.A. 655 Note.
Section 1910.120 also issued under Section 126, Superfund Amendments and Reauthorization Act of 1986 as amended (29 U.S.C.A. 655 Note), and 5 U.S.C. 553.