covered product

(4) Special rules for small batch manufacturers (A) Special consideration; exemption (i) Consideration; alternative requirements Subject to subparagraph (C), in implementing third party testing requirements under this section, the Commission shall take into consideration any economic, administrative, or other limits on the ability of small batch manufacturers to comply with such requirements and shall, after notice and a hearing, provide alternative testing requirements for covered products manufactured by small batch manufacturers in lieu of those required under subsection (a) or (b). Any such alternative requirements shall provide for reasonable methods to assure compliance with any applicable consumer product safety rule, ban, standard, or regulation. The Commission may allow such alternative testing requirements for small batch manufacturers with respect to a specific product or product class or with respect to a specific safety rule, ban, standard, or regulation, or portion thereof. (ii) Exemption If the Commission determines that no alternative testing requirement is available or economically practicable, it shall exempt small batch manufacturers from third party testing requirements under subsections (a) and (b). (iii) Certification In lieu of or as part of any alternative testing requirements provided under clause (i), the Commission may allow certification of a product to an applicable consumer product safety rule, ban, standard, or regulation, or portion thereof, based on documentation that the product complies with another national or international governmental standard or safety requirement that the Commission determines is the same or more stringent than the consumer product safety rule, ban, standard, or regulation, or portion thereof. Any such certification shall only be allowed to the extent of the equivalency with a consumer product safety rule, ban, standard, or regulation and not to any other part of the consumer product safety rule, ban, standard, or regulation. (iv) Restriction Except as provided in subparagraph (C), and except where the Commission determines that the manufacturer does not meet the definition of a small batch manufacturer, for any small batch manufacturer registered pursuant to subparagraph (B), the Commission may not require third party testing of a covered product by a third party conformity assessment body until the Commission has provided either an alternative testing requirement or an exemption in accordance with clause (i) or (ii), respectively. (B) Registration Any small batch manufacturer that utilizes alternative requirements or an exemption under this paragraph shall register with the Commission prior to using such alternative requirements or exemptions pursuant to any guidelines issued by the Commission to carry out this requirement. (C) Limitation The Commission shall not provide or permit to continue in effect any alternative requirements or exemption from third party testing requirements under this paragraph where it determines, based on notice and a hearing, that full compliance with subsection (a) or (b) is reasonably necessary to protect public health or safety. The Commission shall not provide any alternative requirements or exemption for— (i) any of the third party testing requirements described in clauses (i) through (v) of subsection (a)(3)(B); or (ii) durable infant or toddler products, as defined in section 2056a(f) of this title . (D) Subsequent manufacturer Nothing in this paragraph shall be construed to affect third party testing or any other requirements with respect to a subsequent manufacturer or other entity that uses components provided by one or more small batch manufacturers. (E) Definitions For purposes of this paragraph— (i) the term “covered product” means a consumer product manufactured by a small batch manufacturer where no more than 7,500 units of the same product were manufactured in the previous calendar year; and (ii) the term “small batch manufacturer” means a manufacturer that had no more than $1,000,000 in total gross revenue from sales of all consumer products in the previous calendar year. The dollar amount contained in this paragraph shall be adjusted annually by the percentage increase in the Consumer Price Index for all urban consumers published by the Department of Labor. For purposes of determining the total gross revenue for all sales of all consumer products of a manufacturer under this subparagraph, such total gross revenue shall be considered to include all gross revenue from all sales of all consumer products of each entity that controls, is controlled by, or is under common control with such manufacturer. The Commission shall take steps to ensure that all relevant business affiliations are considered in determining whether or not a manufacturer meets this definition.

Source

15 USC § 2063(d)(4)


Scoping language

in this paragraph
Is this correct? or