Ariz. Admin. Code § R17-6-303 - Sign Requirements
A. A
permittee or driver shall ensure that an oversize or overweight vehicle or load
displays an "OVERSIZE LOAD" sign if the vehicle or load is nine feet or more in
width.
B. A permittee or driver may
display an "OVERSIZE LOAD" sign on any oversize or overweight envelope or
special permitted vehicle or load not specified under subsection (A) if
necessary to ensure maximum visibility for public safety.
C. An "OVERSIZE LOAD" sign shall meet
construction specifications provided under Illustration 2 at a
minimum.
D. A permittee or driver
shall display required "OVERSIZE LOAD" signs that are:
1. Mounted to the front or roof of the power
unit,
2. Mounted to the rear of the
load or loaded vehicle,
3. Parallel
with the road surface from side-to-side,
4. Readable from left to right, and
5. Clearly visible from the front and rear of
the loaded vehicle.
E. If
a permittee or driver required under this Section to display an "OVERSIZE LOAD"
sign is not transporting an oversize or overweight load, the permittee or
driver shall ensure that each sign is not visible to traffic.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.