Cal. Code Regs. Tit. 13, div. 3, ch. 13, art. 1, app C

Quality Control Check List

Check each box indicating whether the emissions-related or drive train part has been removed or destroyed. Insert N/A where a part is not in the original vehicle design.

Dismantler ___________________________	Date ___________________________
Address ___________________________
Quality Control Inspector ___________________________
Vehicle Make ___________________________
Vehicle Model ___________________________	Vehicle Year ___________________________
Vehicle License Number ___________________________
Vehicle Odometer Mileage___________________________

Category	Emission-Related Part	Part Removed	Part Destroyed
Air Induction System	Temperature sensor elements Vacuum motor for air control Hot air duct & stove Air filter housing & element Turbocharger or supercharger Intercooler
	Metering jets
	Metering rods
	Needle and seat
Emission Calibrated	Power valve
Carburetors	Float circuit
	Vacuum break
	Choke mechanism
	Throttle-control solenoid
	Deceleration valve
	Dashpot
	Idle stop solenoid,
Emission Calibrated	anti-dieseling assembly
Carburetors	Accelerating pump
(continued)	Altitude compensator
	Pressure regulator
	Fuel injection pump
	Fuel injector
Mechanical Fuel Injection:	Throttle-position compensator
	Engine speed compensator
	Engine temperature compensator
	Altitude cut-off valve
	Deceleration cut-off valve
	Cold-start valve
	Fuel pump
	Pressure accumulator
	Fuel filter
	Fuel distributor
Continuous Fuel	Fuel injections
Injection:	Air-flow sensor
	Throttle-position compensator
	Warm-running compensator
	Pneumatic overrun compensator
	Cold-start valve
	Pressure regulator
	Fuel distribution manifold
	Fuel injectors
Electronic Fuel	Electronic control unit
Injection:	Engine speed sensor
	Engine temperature sensor
	Throttle-position sensor
	Altitude/manifold-pressure sensor
Electronic Fuel Injection:	Cold-start valve
Air Fuel Ratio	Frequency valve
Control:	Oxygen sensor
Air Fuel Ratio Control:	Electronic control unit
Intake Manifold	Intake Manifold Assembly
	Cam
	Points
	Rotor
	Condenser
Distributor	Distributor cap
	Breaker plate
	Electronic components (breakerless or electronic system)
	Centrifugal advance mechanism: weights and springs
	Vacuum advance unit
	Transmission controlled spark system: vacuum solenoid, transmission switch, temperature switches, time delay, CEC valve, reversing relay
Spark Advance/Retard System	Electronic spark control system: computer circuitry, speed sensor, temperature switches, vacuum switching valve
	Orifice spark advance control system: vacuum bypass valve, orifice spark advance control valve, temperature control switch, distributor vacuum control switch
	Speed controlled spark system: vacuum solenoid, speed sensor and control switch, thermal vacuum switch
Spark Plugs	Spark Plugs
Ignition Coil	Ignition Coil
Ignition Wires	Ignition Wires
	Engine
	Flywheel
	Bell Housing
Drive Train	Drive Shaft
	Transmission
	Differentials
	Axles
	Brakes
	Intake valves
	Exhaust valves
	Valve guides
	Valve springs
Mechanical	Valve seats
Components	Camshaft
	Cylinder head or rotor housing
	Piston or rotor
	Vapor Storage Canister and Filter
Evaporative Control	Vapor Liquid Separator
System	Filler Cap
	Fuel Tank
	Canister Purge Valve
	PCV Valve
Positive Crankcase	Oil Filler Cap
Ventilation System	Manifold PCV Connection Assembly
Exhaust Gas Recirculation System	EGR Valve: valve body and carburetor spacer,
	EGR Valve: internal passages and exhaust gas orifice
	Speed sensor
	Solenoid vacuum valve
	Electronic amplifier
	Temperature-controlled vacuum valve
Driving Mode	Vacuum reducing valve
Sensors	EGR coolant override valve
	Backpressure transducer
	Vacuum amplifier
	Delay valves
	Pump
	Pressure-relief valve
	Pressure-setting plug
	Pulsed air system
	Diverter
Air Injection System	Relief, bypass, or gulp valve
	Check or anti-backfire valve
	Deceleration control part
	Flow control valve
	Distribution manifold
	Air switching valve
	Temperature sensor
	Constricted fuel filler neck
	Catalyst beads (pellet-type converter),
	Ceramic support and monolith coating (monolith-type converter),
	Converter body and internal supports,
Catalytic	Exhaust manifold
Converter/Thermal Reactor/exhaust	Reactor casing and lining
	Exhaust manifold and exhaust port liner
	Manifold
	Exhaust port liners,
	Double walled portion of exhaust system,
	Heat riser valve and control assembly
Miscellaneous Items	Hoses, clamps, and pipers
Used in Above Systems	Pulleys, belts, and idlers
	Electronic Control Unit (ECU)
Computer Controls	Computer-coded engine operating parameter (including computer chips)
	All sensors and actuators associated with the ECU

Quality Control Inspector Final Verification All Emission-Related Parts Removed and Destroyed
Quality Control Inspector Signature:
________________________________________________________________________
Date:
______________________________________________________________________

Notes

Cal. Code Regs. Tit. 13, div. 3, ch. 13, art. 1, app C

1. New appendix C filed 1-3-2003; operative 1-3-2003 pursuant to Government Code section 11343.4 (Register 2003, No. 1).
2. Redesignation of former appendix C as appendix B and redesignation of former appendix D as new appendix C, including repealer and new appendix heading and new introductory paragraph, filed 7-13-2007; operative 8-12-2007 (Register 2007, No. 28).

1. New appendix C filed 1-3-2003; operative 1-3-2003 pursuant to Government Code section 11343.4 (Register 2003, No. 1).
2. Redesignation of former appendix C as appendix B and redesignation of former appendix D as new appendix C, including repealer and new appendix heading and new introductory paragraph, filed 7-13-2007; operative 8-12-2007 (Register 2007, No. 28).