Cal. Code Regs. Tit. 17, § 30467 - X-ray Bone Densitometry Supervisor and Operator Permit Requirements and Scope of Permit
(a) Except as provided in subsection (c), any
licensed physician and surgeon or osteopathic physician and surgeon who uses or
supervises the use of an X-ray bone densitometer (XBD) shall possess an X-ray
bone densitometry supervisor and operator permit. The permit shall be valid
only for the particular bone densitometer the physician and surgeon was trained
to use, and for any other XBD that meets all of the following criteria only if
the physician and surgeon has completed training, as specified in section
30466(a)(5)(C),
for the use of that particular XBD. The authorized activity, as specified in
section 30461(e), covered
by the permit shall be limited to the use of an XBD that:
(1) Does not require user intervention for
calibration;
(2) Does not provide
an image for diagnosis; and
(3) Is
used only to estimate bone density of the heel, wrist, or finger of the
patient.
(b) The
physician and surgeon shall, upon request, provide evidence of training
pursuant to section
30466(a)(5)(C)
for any XBD used or supervised by the physician and surgeon.
(c) An X-ray bone densitometry supervisor and
operator permit is not required of any licensed physician and surgeon who holds
a current and valid radiology supervisor and operator certificate or
radiography supervisor and operator permit.
Notes
2. Amendment of subsections (a) and (b) filed 6-7-2018; operative 10-1-2018 (Register 2018, No. 23).
Note: Authority cited: Sections 114870 and 131200, Health and Safety Code. Reference: Sections 114870(f), 131050, 131051 and 131052, Health and Safety Code.
2. Amendment of subsections (a) and (b) filed 6-7-2018; operative
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.