Cal. Code Regs. Tit. 22, § 66387.2 - References
(a) When used in
Chapter 25, the following publications are incorporated by reference:
(1) ILAC-P5:10:2013, "International
Laboratory Accreditation Cooperation (ILAC) Multilateral Recognition
Arrangement", dated 2013, available from the ILAC Secretariat, PO Box 7507,
Silverwater, NSW 2128, Australia.
(2) ISO/IEC Guide 65:1996, "General
requirement for bodies operating product certification systems," dated 1996,
available from the International Organization for Standardization (ISO), ISO
Central Secretariat, 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20,
Switzerland
(3) ISO/IEC 17011:2005,
"General requirements for accreditation bodies accrediting conformity
assessment bodies", dated 2005, available from International Organization for
Standardization (ISO), ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP
56, CH-1211 Geneva 20, Switzerland
(4) ISO/IEC 17025:2005, "General requirements
for the competence of testing and calibration laboratories," dated 2005,
available from International Organization for Standardization (ISO), ISO
Central Secretariat, 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20,
Switzerland
(5) ISO/IEC 17065:2012,
"Conformity assessment -- Requirements for bodies certifying products,
processes and services," dated 2012, available from International Organization
for Standardization (ISO), ISO Central Secretariat, 1, ch. de la Voie-Creuse,
CP 56, CH-1211 Geneva 20, Switzerland
(6) NELAC Institute Standard, Environmental
Laboratory Sector, Volume 1, "Management and Technical Requirements for
Laboratories Performing Environmental Analysis," dated 2009, available from The
NELAC Institute, P. O. Box 2439, Weatherford, TX 76086;
(7) SAE J 866:JUL2012, "Friction Coefficient
Identification and Environmental Marking System for Brake Linings," dated July
2012, available from the Society of Automotive Engineers (SAE) Customer
Service, 400 Commonwealth Drive, Warrendale, PA 15096-0001;
(8) SAE J 2975:DEC2013, "Measurement of
Copper and Other Elements in Brake Friction Materials," dated December 2013,
available from the Society of Automotive Engineers (SAE) Customer Service, 400
Commonwealth Drive, Warrendale, PA 15096-0001.
Notes
Note: Authority cited: Health and Safety Code sections 25250.50, 25250.60 and 58012. Reference: Health and Safety Code section 25260.60.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.