Cal. Code Regs. Tit. 8, § 1727 - Kettles Mounted and Used on Elevated Truck Beds
(a) Platforms shall be designed and
constructed to:
(1) Carry imposed load
without excessive tipping or distortion.
(2) Provide a clear work area at least 4 feet
wide at the accessible sides and ends of the kettle, including an unobstructed
4-foot passageway between the kettle spigot and the roof.
(3) Provide a noncombustible platform or
platform covering.
(b) An
access ladder to the platform must be provided. This ladder shall be fixed or
be provided with an easily engaged attachment bracket that will prevent ladder
slippage. Ladder rails must extend 3 feet above the platform, unless adequate
handholds above the platform are provided.
(c) Railings shall be provided around the
edges of the platform in accordance with the provisions of Article 16, Standard
Railings.
(d) The platform shall be
kept reasonably free from asphalt or pitch drippings.
(e) Kettle covers shall be closed when the
truck is in motion.
(f) Kettles
shall be securely attached to the platform so they will not shift or
tip.
(g) Kettle burners must be
extinguished when the truck is moving.
(h) No riders are to be allowed on the
elevated platform while the truck is in motion.
(i) Platforms which can be raised and lowered
shall be locked in place when in an elevated position.
Notes
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.