Any vehicle within the state which carries any pressurized gas
as its fuel in a tank attached to the vehicle in any concealed area, including
but not limited to, trunks, compartments or under such vehicle pursuant to
Public Act No. 83-317 shall have displayed on its exterior the words
"Pressurized Flammable Gas" in block letters at least two inches high (50.8
mm), which letters shall be contrasting colors and shall be placed as near as
possible to the area where the tank is located. In lieu of the above described
lettering a vehicle which is required to be so identified may have permanently
affixed to its exterior a reflectorized weather resistant sign which shall be
horizontally oriented diamond the center height of which shall be two-thirds
(2/3) of the centerline length and of sufficient size to accommodate block
lettering of at least 50.8 mm (2 inches) and further described as
follows:
(a) In the case of vehicles
using compressed natural gas or liquified natural gas, in silver or white
letters CNG centered on a blue background.
(b) In the case of any vehicle using any
liquified petroleum gas, in white letters PROPANE centered on a black
background.
(c) In the case of
vehicles using pressurized flammable gas other than those provided for in
either subsection (a) or subsection (b), in white letters PFG centered on a red
background.
(d) In the event any
such sign is affixed to a vehicle the color of which does not provide
significant contrast between the vehicle color and the sign, the sign shall
have a 6 mm (1/4 inch) border of the same color as the letters on the sign so
as to provide ready recognition of the sign.
(e)
(1) Each
vehicle required to be identified pursuant to Public Act No. 83-317 shall have
the required sign, label or placard affixed to either the body of the vehicle
as near as is practicable to the filling connection or directly upon the fuel
tank at the filling connection so as to be clearly legible when viewed at a
distance of 7.6 meters (25 feet) perpendicular to the vehicle upon which it is
displayed.
(2) Unless the sign,
label or placard required pursuant to subdivision (1) of this section is
located as hereinafter provided, each motor vehicle shall in addition to the
identification required pursuant to subdivision (1) have an additional sign,
label or placard affixed to the back of the vehicle, not including the bumper,
within 76 cm (30 inches) of the license plate which shall be clearly legible
when viewed at a distance of 7.6 meters (25 feet) directly to the rear of the
motor vehicle on which it is displayed.