Conn. Agencies Regs. § 16-11-28 - Meter testing equipment
(a) Every gas
company furnishing metered gas service shall have access to at least one
suitable meter prover maintained in good condition and correct adjustment so
that it shall be capable of determining the accuracy of any service meter to
within one-half of one percent.
(b)
Every meter prover shall be supplied with all accessories needed for accurate
meter testing and shall be located in a room suitable for the work to be done,
protected from draughts and excessive changes of temperature.
(c) Every prover shall be accompanied by a
certificate signed by a proper authority, giving the date when such prover was
last tested and adjusted, or a tag referring to such certificate may be
attached when more practicable. These certificates when superseded shall be
kept on file in the office of the gas company. Every gas company shall keep the
commission informed as to the prover equipment in use, reporting the accuracy
at the time of each certification, and notify the commission in writing of any
alteration, accident or repair whch might affect the accuracy of any
prover.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.