Ga. Comp. R. & Regs. R. 120-3-23-.09 - Requirements for Pre-Engineered Industrial Fire Suppression System Technician Permit
(1)An individual may obtain a permit to
install, inspect, repair, recharge, service or test pre-engineered industrial
fire suppression system upon meeting the following requirements:
(a) The applicant for a permit to install,
inspect, repair, recharge, service or test pre-engineered industrial fire
suppression systems has submitted a completed permit application form
acceptable to the Commissioner.
(b)
The applicant for a permit to install, inspect, repair, recharge, service, or
test pre-engineered industrial fire suppression systems has paid an annual
permit of twenty-five dollars ($25.00) and a one time non-refundable filing fee
of twenty-five dollars ($25.00) to the Commissioner if the applicant is a new
employee of the firm.
(c) The
applicant for a permit to install, inspect, repair, recharge, service or test
pre-engineered industrial fire suppression systems has submitted evidence of
employment by a firm properly licensed to install, inspect, service and test
pre-engineered industrial fire suppression systems.
(d) The applicant for a permit to install,
inspect, repair, recharge, service or test pre-engineered industrial fire
suppression systems has submitted to the Commissioner the following required
for processing of the permit:
1. A current
color headshot digital photograph, taken with a three (3) Megapixel camera or
better, and saved at the lowest resolution available in a jpeg or jpg
format.
2. A completed signature
form attached to the application containing three (3) individual signatures of
the applicant within the designated areas. The signatures shall be a true
representation of the applicant's normal signature and shall be in black ink
using a medium point pen. Fine point pens shall not be acceptable.
(e) The applicant for a permit to
install, inspect, repair, recharge, service or test pre-engineered industrial
fire suppression systems has submitted to the Commissioner evidence of
compliance with one of the following:
1.
Current certification from the manufacturer of the pre-engineered industrial
fire suppression system denoting the specific system and areas in which the
applicant has been successfully trained and certified.
2. Notification from the National Institute
of Certification in Engineering Technologies (NICET) denoting the successful
completion of Level II, Technician certification exam requirements for Special
Hazards Suppression Systems.
3.
Current certification as a Pre-Engineered Industrial Fire Extinguishing System
Technician by the National Association of Fire Equipment Distributors
(NAFED).
4. Current certification
or testing by other nationally recognized organizations as deemed appropriate
and acceptable by the Commissioner.
(f) Nothing shall preclude the Commissioner
from verifying such evidence of notification, certification or testing as
required in subparagraph (e).
(2) Any permit issued under the provisions of
subparagraph (e)1. due to certification received from the manufacturer shall be
considered a restricted permit to only allow the firm's permit holder(s) to
install, inspect, service and test those pre-engineered industrial fire
suppression systems whom certification is received and filed with the
Commissioner under the firm's license. Such restricted permit shall not
constitute any additional approvals as a permit for the installation,
inspection servicing or testing of any other pre-engineered industrial fire
suppression system regardless of the permit holder's qualifications.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.