Idaho Admin. Code r. 24.39.80.302 - ILLUSTRATION OF UNDERCUTS
01.
Illustration of Undercuts.
FIGURE 302.01.a. - CONVENTIONAL UNDERCUT
Click here to view image
a. Conventional Undercut. May be made with parallel saw cut and a diagonal cut. Backcut (D) shall be above undercut.
FIGURE 302.01.b. - HUMBOLT UNDERCUT
Click here to view image
b. Humbolt Undercut. A cut in which both cuts made with the saw leaves a square end log (See Figure 302.01.b.). The cut is the same as a conventional cut (See Figure 302.01.a.) except that waste is on the stump. Backcut (D) shall be above undercut.
FIGURE 302.01.c. - OPEN FACE UNDERCUT
Click here to view image
c. Open Face Undercut. A cut in which two (2) angle cuts are made with the saw (See Figure 302.01.c.) -- It is used when it is necessary that the face does not close until the tree is near the ground.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.