Idaho Admin. Code r. 24.39.80.701 - MACHINE SAFETY REQUIREMENTS
01.
Harvesting Machines. Harvesting machines for cable-assisted
logging operations shall comply with each of the following: (3-31-22)
a. Meet the protective structure requirements
set forth in IDAPA 07.08.10.010; (3-31-22)
b. Be equipped with a certified roll-over
protective structure (ROPS); and (3-31-22)
c. Be equipped with at least a four (4)-point
restraint system approved by the machine's manufacturer or a qualified person.
(3-31-22)
02.
System Approval. The cable-assisted logging system shall be
designed and constructed for cable- assisted logging applications by the
original equipment manufacturer, or approved for cable-assisted logging
applications in writing by the original equipment manufacturer or a registered
professional engineer. (3-31-22)
03.
Operation of System. The
cable-assisted logging system shall be operated, inspected and maintained in
accordance with the manufacturer's recommendations, specifications and
limitations, or if no manufacturer's recommendations exist, then by the
recommendations of a registered professional engineer. Cable-assisted logging
systems not in safe operating condition shall be removed from service until
repaired by a qualified person. (3-31-22)
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.