Ill. Admin. Code tit. 35, § 724.290 - Applicability
The requirements of this Subpart J apply to owners and operators of facilities that use tank systems for storing or treating hazardous waste, except as otherwise provided in subsection (a), (b), or (c) or in Section 724.101.
a) Tank systems that are used to store or
treat hazardous waste that contains no free liquids and are situated inside a
building with an impermeable floor are exempted from the requirements in
Section
724.293.
To demonstrate the absence or presence of free liquids in the stored or treated
waste, the following test must be used: USEPA Method 9095B (Paint Filter
Liquids Test), as described in "Test Methods for Evaluating Solid Wastes
Physical/Chemical Methods" USEPA publication number EPA-530/SW-846,
incorporated by reference in 35 Ill. Adm. Code
720.111(a).
b) Tank systems, including sumps, are defined
in 35 Ill. Adm. Code
720.110, that
serve as part of a secondary containment system to collect or contain releases
of hazardous wastes are exempted from the requirements in Section
724.293(a).
c) Tanks, sumps, and other such collection
devices or systems used in conjunction with drip pads, as defined in 35 Ill.
Adm. Code
720.110 and
regulated under Subpart W, must meet the requirements of this Subpart
J.
Notes
Amended at 30 Ill. Reg. 3196, effective February 23, 2006
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.