Ill. Admin. Code tit. 35, § 724.936 - Reporting Requirements
a) A
semiannual report must be submitted by owners and operators subject to the
requirements of this Subpart AA to the Agency by dates specified in the RCRA
permit. The report must include the following information:
1) The USEPA identification number (35 Ill.
Adm. Code
722.112
), name, and address of the facility.
2) For each month during the semiannual
reporting period the following:
A) Dates when
the control device did the following:
i)
Exceeded or operated outside of the design specifications, as defined in
Section
724.935(c)(4);
and
ii) Such exceedances were not
corrected within 24 hours, or that a flare operated with visible emissions, as
defined by Reference Method 22 monitoring;
B) The duration and cause of each exceedance
or visible emissions; and
C) Any
corrective measures taken.
b) If during the semiannual reporting period,
the control device does not exceed or operate outside of the design
specifications, as defined in Section
724.935(c)(4),
for more than 24 hours or a flare does not operate with visible emissions, as
defined in Section
724.933(d),
a report to the Agency is not required.
Notes
Amended at 32 Ill. Reg. 12365, effective July 14, 2008
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.