06-096 C.M.R. ch. 132, § 3 - Standards
A.The owner or operator of a packaging
rotogravure, publication rotogravure, or flexographic printing press shall
comply with the standards in this section or with the standards or operational
methods required under either section 4 (daily-weighted average limitations) or
section 5 (compliance by means of control devices) of this Chapter.
B. The owner or operator of a packaging
rotogravure or flexographic printing press subject to this section shall not
apply any coating or ink unless the VOC content is equal to or less than one of
the following:
(1) 40 percent VOC by volume
of the coating or ink, excluding water and exempt compounds, as
applied;
(2) 25 percent VOC by
volume of the volatile content in the coating or ink, as applied; or
(3) 0.5 kilogram (kg) VOC per kg (0.5 pound
[lb] VOC per lb) coating solids, as applied.
C. The owner or operator of a publication
rotogravure printing press subject to this section shall not apply any coating
or ink unless the VOC content is equal to or less than one of the following:
(1) 40 percent VOC by volume of the coating
or ink, excluding water and exempt compounds, as applied; or
(2) 25 percent VOC by volume of the volatile
content in the coating or ink, as applied.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.