06-096 C.M.R. ch. 132, § 5 - Control devices
A. The owner or
operator of a packaging rotogravure, publication rotogravure, or flexographic
printing press equipped with a control system shall not operate the printing
press unless:
(1) The control device reduces
VOC emissions delivered from the capture system to the control device by at
least 90 percent by weight; and
(2)
The printing press is equipped with a capture system and control device that
provides an overall emission reduction efficiency of at least:
(a) 75 percent for a publication rotogravure
printing press;
(b) 65 percent for
a packaging rotogravure printing press; or
(c) 60 percent for a flexographic printing
press.
B. An
owner or operator of a packaging rotogravure, publication rotogravure, or
flexographic printing press equipped with a control system shall ensure that:
(1) The capture system and control device are
operated at all times that the printing press is in operation, and
(2) The control device is equipped with the
applicable monitoring equipment specified in Appendix A, Procedure (E)(b), and
the monitoring equipment is installed, calibrated, operated, and maintained
according to the manufacturer's specifications at all times the control device
is in use.
C. The owner
or operator shall demonstrate compliance with this section through the
applicable coating analysis and test methods specified in Appendix A, Procedure
B, E, and F and in accordance with the capture efficiency test methods in
Chapter 126.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.