99-420 C.M.R. ch. 2, § 11 - Location of Sign Assemblies
1.
MAINLINE
SIGN ASSEMBLIES
A. Mainline sign
assemblies shall be erected between the previous interchange and at least 800
feet in advance of the first exit direction sign closest to the interchange
from which the services are available. There shall be at least 800 feet spacing
between the logo sign assemblies and other highway signs.
B. If a service meets the criteria for
approval at more than one interchange, signing will be allowed only from the
exit providing the most direct route in each direction.
C. Once services are selected for a
particular assembly, the first approved service from which an application was
received will have its sign placed on the top left of the assembly and the
second service facility of the same type will be on the next space
horizontally. In cases where two types of services are combined on the same
assembly , logos will be arranged with similar services grouped horizontally
and the following priority of services displayed from top to bottom: lodging,
camping, and attractions.
D. The
number of sign assemblies shall be limited to one for each type of service
along an approach to an interchange. At double exit interchanges the top
section shall display logos for the first exit and the lower section shall
display logos for the second exit. Specific service signs at double exit
interchanges shall be limited to four logos each and shall be displayed
successively in the direction of travel in the following order: camping,
lodging, and attractions.
2.
RAMP SIGN ASSEMBLIES
A. Ramp sign assemblies shall be installed
along the ramp for service facilities which have logos displayed along the
interstate unless the service is readily visible from the ramp terminal or if
there is only one direction of travel possible at the end of the ramp and the
service is less than ½ mile from the end of the ramp. Logos on ramp
signs shall be duplicates of the corresponding logos installed along the main
roadway and shall be grouped in the same manner as mainline signing. Ramp sign
assemblies shall include distances to the nearest mile to the service if
located more than ½ mile from the exit ramp. Directions shall be
indicated by arrows.
B. Signs along
the ramp shall be installed on the right side of the ramp, unless
circumstances, including but not limited to physical layout and visibility,
require left side installation. Spacing shall be provided between all ramp sign
assemblies and between ramp sign assemblies and other highway signs to provide
motorists adequate time to read all the messages on the ramp.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.