Md. Code Regs. 26.11.09.03 - General Conditions for Fuel-Burning Equipment
A. When two or more fuel-burning equipment
units are connected to a single stack, the combined heat input of all units
connected to the stack shall be used to determine the allowable emissions for
the stack.
B. When a single
fuel-burning equipment unit is connected to two or more stacks, the allowable
emissions from all the stacks combined may not exceed that allowable for the
same unit if connected to a single stack.
C. Calculations.
(1) All calculations of particulate matter
emissions to determine compliance with a concentration requirement expressed as
grains per standard cubic foot or milligrams per cubic meter of dry exhaust
gas, shall be corrected to 50 percent excess air.
(2) All calculations of particulate matter
emissions to determine compliance with a mass emissions requirement expressed
as pounds particulate matter per million Btu, shall be made in accordance with
the procedures for determining particulate matter emission rates in 40 CFR Part
60 Appendix A, Method 19.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.