Md. Code Regs. 26.13.07.02-10 - Specific Information Requirements for Solid Waste Management Units
A. In addition to
complying with the requirements of Regulation .02 of this chapter, a person
seeking a CHS facility permit shall provide the Secretary with the following
information for each solid waste management unit at the facility:
(1) The location of the unit on the
topographic map required under Regulation .02D(35) of this chapter;
(2) Designation of type of unit;
(3) General dimensions and structural
description along with any available drawings;
(4) When the unit was operated;
(5) Specification of all wastes that have
been managed at the unit, to the extent available; and
(6) All available information pertaining to
any release of hazardous wastes or hazardous constituents from the
unit.
B. The permit
applicant shall conduct and provide the results of sampling and analysis of
ground water, land surface and subsurface strata, surface water, or air, which
may include the installation of wells, when the Secretary ascertains it is
necessary to complete an assessment that will determine if a more complete
investigation is necessary.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.