Mich. Admin. Code R. 408.10114 - Work rests
Rule 114.
(1)
An off hand grinder shall be equipped with either a work rest so located that
the point of grinding is on a horizontal plane with the wheel spindle, or a
device which shall prevent the work piece from jamming between the abrasive
wheel and the wheel guard. Where a work rest or device is used at a height
other than the horizontal plane with the spindle, a warning sign shall be
installed to prohibit use of the grinder for other than the job for which the
work rest or device was set.
(2) A
work rest shall be adjusted and maintained to within 1/8 inch of the abrasive
wheel. The adjustment shall be accomplished when the abrasive wheel is at
rest.
(3) A work rest shall be
designed and constructed of metal capable of supporting the work
piece.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.