Mich. Admin. Code R. 408.10124 - Guarding cup wheels
Rule 124.
(1)
A cup wheel on a portable grinder shall be protected by a band-type
guard.
(2) A band-type guard shall
be constructed as prescribed in figures 6 and 7 of
R
408.10198 and tables 4 and 5 of
R
408.10199 and adjusted within 1/2 inch of the working
surface of the abrasive wheel.
(3)
A revolving cup guard shall not be used as a method of safeguarding.
(4) A guard for a tool and cutter grinder cup
wheel shall be not less than 180 degrees of the periphery and the back side of
the wheel shall be guarded. The spindle end and nut and front of the wheel need
not be guarded if the spindle end and nut are inside the plane of the working
face of the wheel. See figure 5 of
R
408.10198.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.