Mich. Admin. Code R. 408.10129 - Construction of band type guards
Rule 129. A band type guard for a segment, ring or nut inserted disc wheel shall be constructed as follows:
(a) The band shall be steel plate or material
of equal strength and as prescribed in figure 10 of
R
408.10198 and table 9 of
R
408.10199. The band shall be continuous with the ends
being welded, riveted or bolted in such a manner as to leave the inside free of
projections.
(b) The inside
diameter of the band shall not be more than 1 inch larger than the outside
diameter of the abrasive wheel and shall be concentric with the abrasive
wheel.
(c) The width and adjustment
of the band shall be such that the wheel will not protrude beyond the edge of
the band a distance greater than that prescribed in table 10 of
R
408.10199.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.