Mich. Admin. Code R. 408.10143 - Maintenance for flanges
Rule 143.
(1)
A flange with a worn, warped, sprung or damaged bearing surface shall be
repaired or replaced.
(2) When
resurfacing a straight relieved flange, a recess of not less than 1/16 inch
shall be maintained on the side next to the wheel for a distance prescribed in
table 11 of
R
408.10199.
(3) When resurfacing a straight flange of the
adaptor or sleeve type, the undercut shown in figures 14 and 15 of
R
408.10198 shall be maintained to insure that there
will be no bearing on the sides of the abrasive wheel within 1/8 inch of the
arbor hole.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.