Mich. Admin. Code R. 408.11433 - Stop devices
Rule 1433.
(1)
An emergency stop device shall be available at each point of operation where a
hazard exists and within reach of an employee at that point.
(2) An emergency stop device of the
momentary-contact type shall have a means of being maintained by a device in
the "off" position.
(3) If more
than 1 stop device is located along a conveyor, the devices shall be wired so
that the conveyor can be made re-startable only at the location where
stopped.
(4) A stop device, except
a pull cord, shall be distinguished by its red color.
(5) Conveyors in a series shall be
electrically interlocked so that when any conveyor in the series is stopped for
any reason, the initial stopping shall cause the upstream conveyors to stop if
continued operation creates a hazard.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.