Mich. Admin. Code R. 408.12042 - Monthly to yearly inspections; records; table 2
Rule 2042.
(1)
Monthly-to-quarterly and yearly inspections shall be made in accordance with
table 2. Where supported by a documented record, monthly-to-quarterly
inspections may be scheduled less frequently but not longer than semiannually.
Before use, a crane or monorail system used in a corrosive atmosphere which has
been idle for more than 1 month shall be inspected for all items specified in
table 2. Where conditions of extreme duty cycle, heat, and corrosive or
climatic extremes exist, more frequent inspections shall be conducted before
use.
(2) Records of all
monthly-to-quarterly and yearly inspections shall be kept for not less than 2
years.
(3) Table 2 reads as
follows:
TABLE 2 - MINIMUM INSPECTION SCHEDULE
ITEM | DAILY | MONTHLY TO QUARTERLY | YEARLY OR MORE OFTEN |
Operating Mechanisms | Visual for function | Check for wear, distortion and fractures | |
Limit Switches | Visual & operational for function | Check for adjustment and wear | |
Air Systems | Visual for leaks | Visual for leaks | |
Hydraulic Systems | Visual for leaks | Visual for leaks and abrasions | |
Hooks* | Visual For deformation and cracks | ||
Chains | Visual For wear, elongations and twist | Measure for wear and elongation | |
Wire Rope** | Visual for wear, elongations and twist | Measure for wear | |
Slings | Visual For wear, broken wire, kinks | Measure for wear | |
Rope Reeving | Visual for proper seating in drum and sheave grooves | Visual for proper seating in drum and sheave grooves | |
Chain Drive Sprockets | Check for wear | ||
Drive Chain | Check for stretch | ||
Brake System *** | Functional test | Check for adjustment and wear | |
Sheaves | Check For wear and cracks | ||
Drums | Check For wear and cracks | ||
Fasteners | Check for tightness | ||
Electrical Apparatus | Check electrical components for function, loose connections & deterioration | ||
Lock and Clamp Mooring Devices | Visual for function and wear | Check for wear, distortion and fractures | |
Cab | Check hangers and fasteners | ||
Load, Wind and Other Indicators | Accuracy | ||
Power Plants | Performance and safety requirements | ||
End Stops on Bridge | Visual to ensure they are in place | Check bolts for tightness and wear |
*See rule 2045
**See rule 2044
***See rule 2031(1)(c)
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.