Mich. Admin. Code R. 408.12708 - Definitions; R to T
Rule 2708.
(1)
"Radial saw" means a machine with a circular blade suspended from a horizontal
arm which is pulled through the material.
(2) "Revolving tool lathe" means a lathe
where revolving multiple cutters shape cut revolving stock held between 2
points.
(3) "Router" means a
machine with a revolving vertical cutter and a motor suspended over a table and
used to cut to a predetermined design.
(4) "Run" means the distance from pulley to
pulley.
(5) "Swing saw" means a
machine suspended above a table and equipped with a circular blade which swings
forward from an overhead pivot point.
(6) "Tenoner" means a machine equipped with
horizontal and vertical circular blades to cut tenons and perform trimming
operations.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.