Mich. Admin. Code R. 408.12726 - Circular re-saw guards
Rule 2726.
(1)
A circular re-saw shall be guarded by a hood type guard or shield of metal
above the saw. This guard or shield shall comply with
R
408.12722.
(2) Each circular re-saw, except self-feed
saws with a roller or wheel at back of the saw, shall have a spreader fastened
securely behind the saw. The spreader shall be thinner than the saw kerf and
slightly thicker than the saw disk.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.