Mich. Admin. Code R. 408.13312 - Use of eye and face protection
Rule 3312.
(1)
An employer shall ensure that each affected employee uses appropriate eye or
face protection, when exposed to eye or face hazards from any of the following:
(a) Flying objects or particles.
(b) Harmful contacts.
(c) Exposures.
(d) Molten metal.
(e) Liquid chemicals.
(f) Acids or caustic liquids.
(g) Chemical fumes, gases or
vapors.
(h) Glare.
(i) Injurious radiation.
(j) Electrical flash.
(k) A combination of these hazards. Note:
Appendix B, Appendix Table 1, "Eye and Face Protector Selection Chart," and
Appendix Figure 1, "Eye and Face Protective Devices Chart," which shall be used
as a guide in the selection of the proper eye and face protection.
(2) An employer shall ensure that
each affected employee uses eye protection that provides side protection when
there is a hazard from flying objects. Detachable side protectors, such as
clip-on or slide-on sideshields, that are in compliance with the pertinent
requirements of this rule are acceptable.
(3) A protector shall be in compliance with
all of the following minimum requirements:
(a)
Provides adequate protection against the particular hazards for which it is
designed.
(b) Fits snugly and does
not unduly interfere with movements of the wearer.
(c) Is capable of withstanding
sanitizing.
(4) An
employer shall ensure that eye and face personal protective equipment is
distinctly marked to facilitate identification of the manufacturer.
(5) Limitations or precautions indicated by
the manufacturer shall be transmitted to the user and care taken to ensure that
the limitations or precautions are observed.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.