11 CSR 50-2.110 - Issuance of Inspection Stickers and Decals
(1) An
inspection sticker or decal shall be issued immediately following an inspection
or reinspection if the vehicle meets the inspection requirements. The sticker
or decal shall immediately be properly affixed to the vehicle by the
inspector/mechanic who performed the inspection or reinspection.
(2) When an inspection sticker is issued, the
inspector/ mechanic shall legibly complete the information required on the
reverse side of the inspection sticker. Previous inspection stickers affixed to
the windshield shall be removed. The inspector/mechanic shall affix the current
inspection sticker on the inside of the vehicle's windshield in the lower
left-hand corner. On motor vehicles not equipped with a windshield, the
inspector/mechanic shall issue a properly validated inspection decal and affix
it to the vehicle's dash or steering column.
(3) Location for placement of decals.
(A) When an inspection decal is issued for a
motorcycle or motor tricycle, it shall be affixed in an upright position on the
left side of the steering fork sleeve at a visible location near the slider
tube. When such location is not available, the decal shall be affixed in an
upright position to the frame in a visible location on the front left side of
the vehicle.
(4) Stations
will issue inspection stickers or decals from only one (1) book at a time,
starting with their lowest numbered book.
(5) All covers from used books of both
stickers and decals will be retained by the inspection station.
(6) Inspection stickers or decals issued to
an inspection station can be used only by that station.
Notes
*Original authority: 307.360, RSMo 1967, amended 1971, 1973, 1979.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.