N.H. Code Admin. R. Inst 401.01 - Warranty Seal Required
(a) Pursuant to
RSA
205-D:17, in order to keep record of and
verify the proper installation of manufactured homes, no manufactured house
shall be installed in this state until the manufacturer or licensed installer,
has obtained a warranty seal from the board and attached the seal to the
manufactured house.
(b) The
warranty seal shall bear the following information:
(1) Type of manufactured house
installed;
(2) State
seal;
(3) Manufacturer's
name,address, and telephone number;
(4) Date the house was manufactured and unit
serial number;
(5) Name and license
number of the installer;
(6)
Address and telephone number of installer;
(7) Date of installation;
(b) The warranty seal shall bear
the following information:
(8) Whether the
unit is new or relocated;
(9)
Address of installation;
(10)
Signature of the licensee that is responsible for the installation;
(11) Date the inspection was
performed;
(12) Name and title of
the inspector; and
(13) Signature
of the inspector.
Notes
#8494, eff 12-24-05; ss by #10115, eff 4-14-12; amd by #10337, eff 5-15-13
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.