Upon acceptance and approval of an application, the
commission shall issue a placing in service permit to the registered service
person. All permits issued under this section remain the property of the
commission and must be surrendered upon demand. Permits issued will be either
probationary or annual as defined in this section. Permits must be carried at
all times while conducting weighting or measuring device servicing or
certification and must be produced upon request.
1.
Probationary permits.
a. An annual permitholder's permit may be
downgraded to probationary for not performing proper tests and inspections or
other violations deemed relevant by the commission;
b. The duration of the probationary permit
will be at the discretion of the commission but will not exceed six months from
the effective date ; and
c. A
probationary permitholder shall be accompanied by, and have each placing in
service test report cosigned by, an annual permitholder from the same service
company and qualified in the same weighing or measuring device category in
order for the test report or the placing in service to be considered
valid.
2.
Annual
permits.
a. An applicant who has met
the work history or experience requirements of a registered service person and
satisfactorily completed all required tests will receive an annual
permit;
b. An applicant who has
previously held an annual permit by the commission within the last two years,
but has allowed it to expire, is eligible for permit reinstatement;
and
c. A probationary permitholder
who has completed probationary time or requirements without receiving any
quality assurance failures will receive an annual permit.
Notes
N.D. Admin Code 69-10-04-02.3
Effective May 1, 2005;
amended effective October 1, 2010.
Amended by
Administrative
Rules Supplement 2020-379, January 2021, effective
1/1/2021.
General Authority: NDCC 64-02-03
Law Implemented: NDCC
64-02-02
