N.D. Admin Code 69-10-04-06 - Quality assurance - Evaluation
1.
The commission may evaluate the work performed by a registered service person
to ensure that the person is performing proper inspections and tests. The
evaluation method may be by direct observation or by reinspection of a device
previously placed or recertified by a registered service person. The commission
may consider the following criteria during the evaluation:
a. The results of previous quality assurance
inspections;
b. Complaints filed
against a registered service person, and whether those complaints are valid;
and
c. Other factors deemed
relevant by the commission.
2. A quality assurance inspection ends when
the tested device either fails a portion of the inspection or it passes the
inspection. When a device fails a quality assurance inspection, the failure
will be documented, the device will be rejected, and a follow up quality
assurance inspection will be conducted as soon as practical. When a device
passes a quality assurance inspection, a weights and measures inspector shall
affix a quality assurance inspected tag to the device. A quality assurance
inspection does not take the place of the annual certification.
Notes
General Authority: NDCC 64-02-03
Law Implemented: NDCC 64-02-02, 64-02-13
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.