N.D. Admin Code 69-05.2-08-07 - Permit applications - Permit area - Surface water information
1. The applicant
shall provide a map for the permit and adjacent areas showing:
a. Names and locations of watersheds
receiving mine water discharges.
b. Ephemeral, intermittent, and perennial
streams.
c. Lakes, ponds,
wetlands, springs, drains, and water discharges into surface water bodies.
d. Water supply intakes for
current surface water users.
2. The applicant shall describe surface
drainage systems in sufficient detail to identify seasonal water quality and
quantity variations in the permit and adjacent areas.
3. Surface water information must include:
a. Minimum, maximum, and average discharge
conditions which identify critical low flow and peak discharge stream rates
sufficient to identify seasonal variations.
b. Water quality data to identify the
characteristics of surface waters related to the permit and adjacent areas,
sufficient to identify seasonal variations. The data must include:
(1) Total dissolved solids in milligrams per
liter.
(2) Total suspended solids
in milligrams per liter.
(3) pH in
standard units.
(4) Total iron in
milligrams per liter.
(5)
Additional parameters the commission may require on a site-specific basis.
c. A complete
description of the monitoring procedures used including:
(1) Site locations.
(2) Monitoring frequency for each site.
(3) Techniques and equipment.
4. If
necessary, the applicant shall provide additional surface water information
required by subsections 5 and 6 of section
69-05.2-08-04.
Notes
General Authority: NDCC 38-14.1-03
Law Implemented: NDCC 38-14.1-14
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.