Ohio Admin. Code 1501:10-2-04 - Diesel-powered equipment package
(A) Approval of diesel-powered equipment
package. Each specific model of diesel- powered equipment
shall
will be
approved by the chief before it is taken underground. The diesel-powered
equipment shall
will be approved by the chief as a complete
diesel-powered equipment package, which shall
will be subject
to all of the requirements, standards and
procedures
provisions set forth in this
chapter.
(B) Approval of
diesel-powered equipment maintenance plan, diesel ventilation plan, and
training plans for equipment operators and mechanics. Diesel engines
shall
will be
certified or approved, as applicable, by MSHA, and maintained in accordance
with MSHA certification or approval and the chief's approval. Before
diesel-powered equipment is taken underground, a maintenance plan for
diesel-powered equipment pursuant to rule
1501:10-2-16 of the
Administrative Code, a diesel ventilation plan that meets the requirements of
complies with rules
1501:10-2-06 and
1501:10-2-07 of the
Administrative Code, and training plans for training equipment operators and
mechanics pursuant to rules
1501:10-2-22 to
1501:10-2-24 of the
Administrative Code shall
will be approved by the chief.
(C) All approved diesel-powered equipment
that is included in a mine's complete diesel- powered package
shall
are to
be listed on an inventory sheet submitted to the chief with a copy maintained
at the mine,
. The
following information shall be provided on the inventory list:
and include the following information:
(1) The name, address, state permit number,
and MSHA identification number of the mine;
(2) The name and phone number of the contact
person responsible for maintenance and testing of the diesel
equipment;
(3) The following
specific information for each engine:
(a)
Manufacturer, serial number and model of the equipment using the power-
package;
(b) Manufacturer, model
number and serial number of the engine;
(c) MSHA 30 C.F.R. Part 7 Subpart E approval
number;
(d) Rated horsepower and
revolutions per minute (rpm);
(e)
Diesel particulate matter in grams per hour rating (g/hr) and milligrams per
cubic meter of air (mg/m3); and
(f)
Ventilation rate; and
(4) The following specific information for
each filter system:
(a) Manufacturer and model
of the filter system;
(b) MSHA
efficiency rating of the filter system or an accepted third-party
rating;
(c) System type and
composition (for example, passively regenerated cordirite); and
(d) The manufacturer/model of regeneration
system, if applicable.
(D) For dates of federal rules referenced in
this rule, see rule
1501:10-1-07 of the
Administrative Code.
Notes
Promulgated Under: 119.03
Statutory Authority: 1513.02
Rule Amplifies: 1513.02, 1567.35
Prior Effective Dates: 11/03/2011
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.