Ohio Admin. Code 3745-55-94 - General operating requirements
(A) Hazardous wastes or treatment reagents
must not be placed in a tank system if they could cause the tank, its ancillary
equipment, or the containment system to rupture, leak, corrode, or otherwise
fail.
(B) The owner or operator
must use appropriate controls and practices to prevent spills and overflows
from tank or containment systems. These include, at a minimum:
(1) Spill prevention controls (e.g., check
valves, dry disconnect couplings);
(2) Overfill prevention controls (e.g., level
sensing devices, high level alarms, automatic feed cutoff, or bypass to a
standby tank); and
(3) Maintenance
of sufficient freeboard in uncovered tanks to prevent overtopping by wave or
wind action or by precipitation.
(C) The owner or operator must comply with
the requirements of rule
3745-55-96
of the Administrative Code if a leak or spill occurs in the tank system.
Notes
Rule promulgated under: RC Chapter 119.
Rule amplifies: RC 3734.12
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.