If a term used in this chapter is defined in rule
3745-500-02
of the Administrative Code the definition in rule
3745-500-02
of the Administrative Code is applicable to this chapter unless the term is
defined in this rule. As used in this chapter:
(A)
(1)
"Accept" or "acceptance," in the context of material acceptance, handling, and
disposal activities, means to record material in the log of operations or to
place material on the materials placement area at a composting
facility.
(2)
"Acidic anaerobic fermentation" means a conditioning
method in which compostable materials are inoculated with an effective
microorganism (EM) inoculum and placed in sealed containers for a length of
time sufficient for fermentation to occur under anaerobic conditions and
promote acidification of the compostable material.
(2)
(3)
"Active composting facility" means a composting facility where authorized
feedstocks, bulking agents,
and
additives
, and compost products are received,
processed, or stored.
(3)
(4) "Additive" means a
supplemental material mixed with or otherwise added to feedstocks and bulking
agents to create a favorable condition for the composting process and includes
urea, crushed egg shells,
earthworms,
source-separated spent coffee and tea grounds,
and bacterial or fungal inoculum.
(4)
(5) "Aerated static
pile" means a method of composting where solid waste is constructed into a pile
and air is forced through the pile to enable aerobic composting.
(5)
(6)
"Agricultural
waste
plant materials" means plant material including but
not limited to stems, leaves, vines, or roots from an agricultural
operation.
(6)
(7) "Alteration" means a change, other than a
modification, to a class I composting facility or to a permit to install issued
pursuant to Chapter 3734. of the Revised Code for a class I composting facility
which is at least equivalent to the rule requirements. An alteration includes
but is not limited to changes in the type of waste received, replacement of
equipment, and repair of the facility.
(7)
(8) "Alternative
material" means a waste that might be suitable for use as a feedstock, bulking
agent, or additive in the composting process
including but not limited to animal carcasses, raw rendering
material, and exceptional quality biosolids
that is not authorized in rule for acceptance at a
composting facility.
(8) "Animal carcass" means a carcass
or parts thereof of a domestic or non-domestic animal.
(9) "Animal waste" means animal
excreta, bedding, wash waters, incidental waste feed, and silage
drainage.
(B)
(1) "Biofilter material" means material
consisting of bulking agents, shredded yard waste, or compost that is applied
over the composting mixture to control odors, dust, or vectors.
(2) "Bulking agent" means a material added to
a composting process to provide structural support, improve aeration, or absorb
moisture and includes wood chips, straw, clean untreated wood, shredded
newspaper, shredded cardboard, sawdust, shredded brush,
shredded yard waste, compostable containers, and
stover.
(C)
(1) "Class I solid waste composting facility"
means a facility where the owner or operator may accept yard waste,
agricultural
waste
plant materials, dead animals, raw rendering material,
animal waste, food scraps, mixed solid waste, bulking agents, additives, and
authorized alternative materials.
(2) "Class II solid waste composting
facility" means a facility where the owner or operator may accept yard waste,
agricultural
waste
plant materials,
dead animals,
raw rendering material, animal waste, food scraps, bulking agents,
additives, and authorized alternative materials.
(3) "Class III solid waste composting
facility" means a facility where the owner or operator may accept yard waste,
agricultural
waste
plant materials,
dead animals,
raw rendering material, animal waste, bulking agents,
and additives
, and
authorized alternative materials.
The material
placement area is limited to a maximum of one hundred thirty-five thousand
square feet.
(4) "Class IV
solid waste composting facility" means a facility where the owner or operator
may accept only yard waste,
agricultural plant
materials, bulking agents,
and
additives limited to
source-separated spent coffee and
tea grounds, urea
, and bacterial or fungal
inoculum
, and authorized alternative
materials.
(5) "Clean
untreated wood" means source-separated wood including but not limited to
sawdust, pallets, and dimensional lumber that has not been treated chemically
or with adhesives and coatings including but not limited to paint, glue, or any
other visible contaminant.
(6)
"Commingled yard waste" means yard waste that has been
mixed
collected with other solid wastes. Commingled yard
waste does not include yard waste in bags
mixed
co-collected
with other solid wastes.
(7)
"Compost" means a humus-like organic material resulting from the biological
decomposition of solid waste.
(8)
"Compostable container" means a container
composed
of materials such as vegetable matter, paper, cardboard, and plastic
that
has been independently tested and meets ASTM
D6400 or D6868 as described in rule
3745-500-03
of the Administrative Code,
that may
display
including those displaying the
international biodegradable products
institute's "Compostable Logo,"
and
that
which will decompose
or degrade at a rate equal to or faster
than the material with which
it
the container is composted under equivalent
conditions.
(9) "Compostable
serviceware" means
an item
food service items such as bowls, plates, cups,
cutlery, and films, that
have been independently tested
and meets ASTM D6400 or D6868 as described in rule
3745-500-03
of the Administrative Code,
that may
display
including those displaying the
international biodegradable products
institute's "Compostable Logo,"
and that
which will decompose
or degrade at a rate equal to or faster
than the material with which
it
the serviceware is composted under equivalent
conditions.
(10) "Compost product"
means compost that meets applicable compost product quality
standards.
(11) "Composting" means
the process of biological decomposition of solid wastes under controlled
conditions resulting in compost. Controlled conditions include but are not
limited to grinding, shredding,
chipping, mixing
feedstocks, bulking agents and additives, piling, physical turning,
aerating, adding moisture,
performing procedures to
achieve human pathogen reduction, or other processing of solid
wastes.
(12) "Cross-contamination"
means the intentional or unintentional contact of feedstocks subject to a more
stringent quality standard with a feedstock subject to a less stringent quality
standard and includes but is not limited to contact with the surface of a
machine, the mixture of tested compost with untested compost, or contact with
leachate that was previously in contact with a feedstock subject to a more
stringent quality standard.
(D)
[Reserved.]
(1)
"Dead animals" means bodies or parts of a dead
animal.
(2)
"Design capacity" means the maximum capacity of
materials that may be appropriately managed in the materials placement area,
based upon the design, construction, equipment, composting method, and planned
operational practices as specified in the authorizing documents.
(E)
[Reserved.]
"Effective microorganisms" or "EM," means an inoculum used
for acidic anaerobic fermentation consisting predominately of lactic acid
bacteria, yeasts, actinomycetes, and photosynthetic bacteria.
(F)
[Reserved.]
(1) "Feedstock" means a solid waste
that will readily decompose during the composting process including but not
limited to yard waste, agricultural waste, animal waste, food scraps, animal
carcasses, raw rendering material, and mixed solid waste.
(2) "Food scraps" means food
residuals including but not limited to vegetables, fruits, grains, dairy
products, meats, and the compostable packaging that may be
commingled.
(3) "Foreign/inert matter" means
inorganic and organic constituents that were not readily decomposed during the
composting process including but not limited to plastics, glass, textiles,
rubber, leather, metal, ceramics, styrofoam, sharp objects, and painted,
laminated, or treated wood.
(G) [Reserved.]
(H) [Reserved.]
(I)
(1)
"Inactive composting facility" means a composting facility where no solid
wastes
or compost product are received,
processed, or stored.
(2)
"Inert matter" means inorganic and organic constituents
that were not readily decomposed during the composting process including but
not limited to plastics, glass, textiles, rubber, leather, metal, ceramics,
polystyrene, sharp objects, and painted, laminated, or treated
wood.
(2)
(3) "In-vessel" means a method of composting where
solid wastes are placed in an enclosed or partly enclosed unit and managed to
enable composting.
(J)
[Reserved.]
(K)
[Reserved.]
(L)
[Reserved.]
(M)
(1) "Materials placement area" means any area
of the composting facility where compost products, solid wastes, feedstocks,
bulking agents, or additives are received, placed, processed, or
stored.
(2) "Mixed solid waste"
means a feedstock consisting of solid wastes that will readily decompose and
waste materials that will not readily decompose and may contain household solid
wastes that are excluded from regulation as hazardous wastes in accordance with
Chapter 3745-51 of the Administrative Code.
(3) "Modification" means any substantial
change to the location or size of the material placement area, or to the
design, construction, process, or operation of a class I composting
facility.
(N)
[Reserved.]
(O)
[Reserved.]
(1)
"One hundred year
flood" means a flood that has one per cent chance of being equaled or exceeded
in any given year.
(2)
"Operational capacity" means the amount of materials
designated by the owner or operator to be managed in the materials placement
area as specified in the registration. The operational capacity may be less
than or equal to the design capacity, but shall never exceed the design
capacity.
(P)
[Reserved.]
(Q)
[Reserved.]
(R)
(1) "Raw rendering material"
means a feedstock consisting of any part of a
carcass or product of a carcass of any dead animal that is unwholesome,
condemned, inedible, or otherwise unfit for human consumption
has the same meaning as section
953.21 of the Revised
Code.
(2) "Runoff" means
precipitation that has fallen onto the composting
facility and
stormwater as defined in rule
3745-39-01
of the Administrative Code that has not come in contact with any compost
products, solid wastes, feedstocks, bulking agents, or additives.
(3)
"Run-on" means
precipitation that has fallen upslope of the materials placement area of a
composting facility and flows onto the composting facility.
(S)
(1) "Salvaging" means the extracting or
removing of materials from the solid waste stream at the working face of a
solid waste disposal facility for the intended purpose of recycling or for
removal to a salvage facility regulated by Chapter 3737. of the Revised Code
and rules adopted thereunder.
(2)
"Sewage sludge" has the same meaning as in Chapter 6111. of the Revised Code
and rules adopted thereunder.
(3)
"Static pile" means a method of composting where solid wastes are constructed
into a pile and are managed and turned to enable aerobic composting.
(T)
"Thermophilic stage" means a biological stage in the
composting process characterized by a high rate of decomposition and
temperatures above one hundred thirty-one degrees Fahrenheit.
[Reserved.]
(U) [Reserved.]
(V)
[Reserved.]
(1)
"Vermicompost" means compost produced through the
vermicomposting process and that may contain worm castings.
(2)
"Vermicomposting"
means the mesophilic process of bio-oxidation and stabilization of organic
solid wastes by epigeic earthworm species which turn, fragment, aerate and
increase microbial activity in the solid waste substrate, and results in
vermicompost.
(3)
"Vermiculture" means the breeding of any species of
earthworms in organic waste media, which produces incidental amounts of
vermicompost.
(W)
(1)
"Washout" means
the movement of feedstocks, bulking agents and additives from the material
placement area of the facility as a result of flooding.
(1)
(2)
"Windrow" means an elongated pile.
(2)
(3) "Windrow
composting" means a method of composting where solid wastes are constructed
into an elongated pile and are managed and turned to enable aerobic composting.
(X) [Reserved.]
(Y) "Yard waste" means solid waste
that includes only leaves, grass clippings, brush, garden waste, tree trunks,
tree stumps, holiday trees, prunings from trees or shrubs, and vegetative waste
resulting from the use of commercial products, including but not limited to
discarded flowers, potted flowers, or grave blankets that do not include
plastic, metal, styrofoam, or other non-biodegradable material. Yard waste does
not include wastes from industrial processing, agricultural processing, or food
processing.