|
ASTM
|
ASTM International
100 Barr Harbor Drive, P.O. Box
C700
West Conshohocken, PA
19428
|
|
Standard
referenced
|
Title
|
|
A36/A36M-14:
|
Specification for Carbon
Structural Steel
|
|
A53/A53M-12:
|
Specification for Pipe, Steel,
Black and Hot-dipped, Zinc-coated Welded and Seamless
|
|
A106/A106M-14:
|
Specification for Seamless
Carbon Steel Pipe for High-temperature Service
|
|
A123/A123M-15:
|
Standard Specification for Zinc
(Hot-Dip Galvanized) Coatings on Iron and Steel Products
|
|
A153/A153M-09:
|
Specification for Zinc Coating
(Hot Dip) on Iron and Steel Hardware
|
|
A167-99(2009):
|
Specification for Stainless and
Heat-resisting Chromium-nickel Steel Plate, Sheet and Strip
|
|
A240/A240M-15A:
|
Standard Specification for
Chromium and Chromium-nickel Stainless Steel Plate, Sheet and Strip for
Pressure Vessels and for General Applications
|
|
A254-12:
|
Specification for Copper Brazed
Steel Tubing
|
|
A268-2010:
|
Standard Specification for
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General
Service
|
|
A269-2015:
|
Standard Specification for
Seamless and Welded Austenitic Stainless Steel Tubing for General
Service
|
|
A307-14:
|
Specification for Carbon Steel
Bolts and Studs, 60,000 psi Tensile Strength
|
|
A463/A463M-15:
|
Standard Specification for
Steel Sheet, Aluminum-coated by the Hot-dip Process
|
|
A539-99:
|
Specification for
Electric-resistance-welded Coiled Steel Tubing for Gas and Fuel Oil
Lines
|
|
A563-15:
|
Standard Specification for
Carbon and Alloy Steel Nuts
|
|
A615/A615M-2015aE1:
|
Specification for Deformed and
Plain Carbon-steel Bars for Concrete Reinforcement
|
|
A641/A641M-09a(2014):
|
Specification for Zinc-coated
(Galvanized) Carbon Steel Wire
|
|
A653/A653M-15:
|
Specification for Steel Sheet,
Zinc-coated (Galvanized) or Zinc-iron Alloy-coated (Galvannealed) by the
Hot-dip Process
|
|
A706/A706M-15:
|
Specification for Low-alloy
Steel Deformed and Plain Bars for Concrete Reinforcement
|
|
A755/A755M-2015:
|
Specification for Steel Sheet,
Metallic Coated by the Hot-dip Process and Prepainted by the Coil-coating
Process for Exterior Exposed Building Products
|
|
A792/A792M-10(2015):
|
Specification for Steel Sheet,
55% Aluminum-zinc Alloy-coated by the Hot-dip Process
|
|
A875/A875M-13:
|
Specification for Steel Sheet,
Zinc-5%, Aluminum Alloy-coated by the Hot-dip Process
|
|
A924/FA924M-14:
|
Standard Specification for
General Requirements for Steel Sheet, Metallic-coated by the Hot-dip
Process
|
|
A996/A996M-15:
|
Specifications for Rail-steel
and Axle-steel Deformed Bars for Concrete Reinforcement
|
|
A1003/A1003M-15:
|
Standard Specification for
Steel Sheet, Carbon, Metallic and Nonmetallic-coated for Cold-formed Framing
Members
|
|
B42-2015A:
|
Specification for Seamless
Copper Pipe, Standard Sizes
|
|
B43-15:
|
Specification for Seamless Red
Brass Pipe, Standard Sizes
|
|
B75/B75M-11:
|
Specification for Seamless
Copper Tube
|
|
B88-14:
|
Specification for Seamless
Copper Water Tube
|
|
B101-12:
|
Specification for Lead-coated
Copper Sheet and Strip for Building Construction
|
|
B135-10:
|
Specification for Seamless
Brass Tube
|
|
B209-14:
|
Specification for Aluminum and
Aluminum-alloy Sheet and Plate
|
|
B251-10:
|
Specification for General
Requirements for Wrought Seamless Copper and Copper-alloy Tube
|
|
B302-12:
|
Specification for Threadless
Copper Pipe, Standard Sizes
|
|
B306-13:
|
Specification for Copper
Drainage Tube (DWV)
|
|
B370-12:
|
Specification for Copper Sheet
and Strip for Building Construction
|
|
B695-04(2009):
|
Standard Specification for
Coatings of Zinc Mechanically Deposited on Iron and Steel
|
|
B813-10:
|
Specification for Liquid and
Paste Fluxes for Soldering Applications of Copper and Copper Alloy
Tube
|
|
B828-02(2010):
|
Practice for Making Capillary
Joints by Soldering of Copper and Copper Alloy Tube and Fittings
|
|
C5-10:
|
Specification for Quicklime for
Structural Purposes
|
|
C22/C22M-2015:
|
Specification for
Gypsum
|
|
C27-98(2013):
|
Specification for Standard
Classification of Fireclay and High-alumina Refractory Brick
|
|
C28/C28M-10(2015):
|
Specification for Gypsum
Plasters
|
|
C33/C33M-13:
|
Specification for Concrete
Aggregates
|
|
C34-13:
|
Specification for Structural
Clay Load-bearing Wall Tile
|
|
C35/C35M-(2014):
|
Specification for Inorganic
Aggregates for Use in Gypsum Plaster
|
|
C55-2014A:
|
Specification for Concrete
Building Brick
|
|
C56-13:
|
Standard Specification for
Structural Clay Nonloadbearing Tile
|
|
C59/C59M-00(2015):
|
Specification for Gypsum
Casting Plaster and Molding Plaster
|
|
C61/C61M-00(2015):
|
Specification for Gypsum
Keene's Cement
|
|
C62-13A:
|
Standard Specification for
Building Brick (Solid Masonry Units Made from Clay or Shale)
|
|
C73-14:
|
Specification for Calcium
Silicate Face Brick (Sand Lime Brick)
|
|
C90-14:
|
Specification for Load-bearing
Concrete Masonry Units
|
|
C91/C91M-12:
|
Specification for Masonry
Cement
|
|
C94/C94M-15A:
|
Standard Specification for
Ready-mixed Concrete
|
|
C126-15:
|
Standard Specification for
Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry
Units
|
|
C129-14A:
|
Specification for
Nonload-bearing Concrete Masonry Units
|
|
C143/C143M-15:
|
Test Method for Slump of
Hydraulic Cement Concrete
|
|
C145-85:
|
Specification for Solid
Load-bearing Concrete Masonry Units
|
|
C150/C150M-15:
|
Specification for Portland
Cement
|
|
C199-84(2011):
|
Test Method for Pier Test for
Refractory Mortar
|
|
C203-05a(2012):
|
Standard Test Methods for
Breaking Load and Flexural Properties of Block-type Thermal
Insulation
|
|
C207-06(2011):
|
Specification for Hydrated Lime
for Masonry Purposes
|
|
C208-12:
|
Specification for Cellulosic
Fiber Insulating Board
|
|
C212-14:
|
Standard Specification for
Structural Clay Facing Tile
|
|
C216-15:
|
Specification for Facing Brick
(Solid Masonry Units Made from Clay or Shale)
|
|
C270-14A:
|
Specification for Mortar for
Unit Masonry
|
|
C315-07(2011):
|
Specification for Clay Flue
Liners and Chimney Pots
|
|
C406/C406M-2015:
|
Specifications for Roofing
Slate
|
|
C411-11:
|
Test Method for Hot-surface
Performance of High-temperature Thermal Insulation
|
|
C475/C475M-15:
|
Specification for Joint
Compound and Joint Tape for Finishing Gypsum Wallboard
|
|
C476-10:
|
Specification for Grout for
Masonry
|
|
C503/C503M-2010:
|
Standard Specification for
Marble Dimension Stone
|
|
C514-04(2014):
|
Specification for Nails for the
Application of Gypsum Wallboard
|
|
C552-15:
|
Standard Specification for
Cellular Glass Thermal Insulation
|
|
C557-03(2009)e01:
|
Specification for Adhesives for
Fastening Gypsum Wallboard to Wood Framing
|
|
C568/C568M-2010:
|
Standard Specification for
Limestone Dimension Stone
|
|
C578-15:
|
Specification for Rigid,
Cellular Polystyrene Thermal Insulation
|
|
C587-04(2014):
|
Specification for Gypsum Veneer
Plaster
|
|
C595/C595M-14E1:
|
Specification for Blended
Hydraulic Cements
|
|
C615/C615M-11:
|
Standard Specification for
Granite Dimension Stone
|
|
C616/C616M-10:
|
Standard Specification for
Quartz-based Dimension Stone
|
|
C629/C629M-10:
|
Standard Specification for
Slate Dimension Stone
|
|
C631-09(2014):
|
Specification for Bonding
Compounds for Interior Gypsum Plastering
|
|
C645-14:
|
Specification for Nonstructural
Steel Framing Members
|
|
C652-15:
|
Specification for Hollow Brick
(Hollow Masonry Units Made from Clay or Shale)
|
|
C685/C685M-14:
|
Specification for Concrete Made
by Volumetric Batching and Continuous Mixing
|
|
C726-12:
|
Standard Specification for
Mineral Wool Roof Insulation Board
|
|
C728-15:
|
Standard Specification for
Perlite ThermalInsulation Board
|
|
C744-14:
|
Standard Specification for
Prefaced Concrete and Calcium Silicate Masonry Units
|
|
C836/C836M-15:
|
Specification for High Solids
Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with
Separate Wearing Course
|
|
C841-03(2013):
|
Standard Specification for
Installation of Interior Lathing and Furring
|
|
C842-05(2015):
|
Standard Specification for
Application of Interior Gypsum Plaster
|
|
C843-99(2012):
|
Specification for Application
of Gypsum Veneer Plaster
|
|
C844-2015:
|
Specification for Application
of Gypsum Base to Receive Gypsum Veneer Plaster
|
|
C847-14A:
|
Specification for Metal
Lath
|
|
C887-13:
|
Specification for Packaged,
Dry, Combined Materials for Surface Bonding Mortar
|
|
C897-15:
|
Specification for Aggregate for
Job-mixed Portland Cement-based Plasters
|
|
C920-14A:
|
Standard Specification for
Elastomeric Joint Sealants
|
|
C926-15B:
|
Specification for Application
of Portland Cement-based Plaster
|
|
C933-14:
|
Specification for Welded Wire
Lath
|
|
C946-10:
|
Standard Practice for
Construction of Dry-Stacked, Surface-Bonded Walls
|
|
C954-15:
|
Specification for Steel Drill
Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to
Steel Studs from 0.033 in ( 0.84 mm) or to 0.112 in. ( 2.84 mm) in
Thickness
|
|
C957/C957M-15:
|
Specification for High-solids
Content, Cold Liquid-applied Elastomeric Waterproofing Membrane for Use with
Integral Wearing Surface
|
|
C1002-14:
|
Specification for Steel
Self-piercing Tapping Screws for the Application of Gypsum Panel Products or
Metal Plaster Bases to Wood Studs or Steel Studs
|
|
C1029-15:
|
Specification for Spray-applied
Rigid Cellular Polyurethane Thermal Insulation
|
|
C1032-14:
|
Specification for Woven Wire
Plaster Base
|
|
C1047-14a:
|
Specification for Accessories
for Gypsum Wallboard and Gypsum Veneer Base
|
|
C1063-15A:
|
Specification for Installation
of Lathing and Furring to Receive Interior and Exterior Portland Cement-based
Plaster
|
|
C1088-14:
|
Standard Specification for Thin
Veneer Brick Units Made from Clay or Shale
|
|
C1107/C1107M-14A:
|
Standard Specification for
Packaged Dry, Hydraulic-cement Grout (Nonshrink)
|
|
C1116/C116M-10(2015):
|
Standard Specification for
Fiber-reinforced Concrete and Shotcrete
|
|
C1157-11/C1157M-11:
|
Standard Performance
Specification for Hydraulic Cement
|
|
C1167-11:
|
Specification for Clay Roof
Tiles
|
|
C1177/C1177M-13:
|
Specification for Glass Mat
Gypsum Substrate for Use as Sheathing
|
|
C1178/C1178M-13:
|
Specification for Glass Mat
Water-resistant Gypsum Backing Panel
|
|
C1186-08(2012):
|
Specification for Flat Fiber
Cement Sheets
|
|
C1261-13:
|
Specification for Firebox Brick
for Residential Fireplaces
|
|
C1278/C1278M-07a(2011):
|
Specification for
Fiber-reinforced Gypsum Panels
|
|
C1283-11:
|
Practice for Installing Clay
Flue Lining
|
|
C1288-14:
|
Standard Specification for
Discrete Nonasbestos Fiber-cement Interior Substrate Sheets
|
|
C1289-15:
|
Standard Specification for
Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
|
|
C1325-14:
|
Standard Specification for
Nonasbestos Fiber-mat Reinforced Cement Interior Substrate Sheets Backer
Units
|
|
C1328/C1328M-12:
|
Specification for Plastic
(Stucco) Cement
|
|
C1363-11:
|
The Standard Test Method for
Thermal Performance of Building Materials and
Envelope Assemblies by Means of
a Hot Box Apparatus
|
|
C1364-10B:
|
Standard Specification for
Architectural Cast Stone
|
|
C1396/C1396M-2014A:
|
Specification for Gypsum
Board
|
|
C1405-15:
|
Standard Specification for
Glazed Brick (Single Fired, Brick Units)
|
|
C1492-03(2009):
|
Specification for Concrete Roof
Tile
|
|
C1513-2013:
|
Standard Specification for
Steel Tapping Screws for Cold-formed Steel Framing Connections
|
|
C1634-15:
|
Standard Specification for
Concrete Facing Brick
|
|
C1658/C1658M-13:
|
Standard Specification for
Glass Mat Gypsum Panels
|
|
C1668-13a:
|
Standard Specification for
Externally Applied Reflective Insulation Systems on Rigid Duct in Heating,
Ventilation, and Air Conditioning (HVAC) Systems
|
|
C1670/1670M-16:
|
Standard Specification for
Adhered Manufactured Stone Masonry Veneer Units
|
|
C1691-11:
|
Standard Specification for
Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
|
|
C1693-11:
|
Standard Specification for
Autoclaved Aerated Concrete (AAC)
|
|
C1766-13:
|
Standard Specification for
Factory-Laminated Gypsum Panel Products
|
|
D41/D41M-2011:
|
Specification for Asphalt
Primer Used in Roofing, Dampproofing and Waterproofing
|
|
D43/D43M-2000(2012)E1:
|
Specification for Coal Tar
Primer Used in Roofing, Dampproofing and Waterproofing
|
|
D226/D226M-09:
|
Specification for
Asphalt-saturated (Organic Felt) Used in Roofing and Waterproofing
|
|
D227/D227M-03(2011)e1:
|
Specification for Coal Tar
Saturated (Organic Felt) Used in Roofing and Waterproofing
|
|
D312/D321M-15:
|
Specification for Asphalt Used
in Roofing
|
|
D422-63(2007)E2:
|
Test Method for Particle-size
Analysis of Soils
|
|
D449/D449M-03(2014)E1:
|
Specification for Asphalt Used
in Dampproofing and Waterproofing
|
|
D450/D450M-07(2013)E1:
|
Specification for Coal-tar
Pitch Used in Roofing, Dampproofing and Waterproofing
|
|
D1227-13:
|
Specification for Emulsified
Asphalt Used as a Protective Coating for Roofing
|
|
D1248-12:
|
Specification for Polyethylene
Plastics Extrusion Materials for Wire and Cable
|
|
D1693-15:
|
Test Method for Environmental
Stress-cracking of Ethylene Plastics
|
|
D1784-11:
|
Standard Specification for
Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl
Chloride) (CPVC) Compounds
|
|
D1863/D1863M-05(2011)e1:
|
Specification for Mineral
Aggregate Used in Built-up Roofs
|
|
D1970/D1970M-2015A:
|
Specification for Self-adhering
Polymer Modified Bitumen Sheet Materials Used as Steep Roofing
Underlayment for Ice Dam
Protection
|
|
D2178/D2178M-15:
|
Specification for Asphalt Glass
Felt Used in Roofing and Waterproofing
|
|
D2412-11:
|
Test Method for Determination
of External Loading Characteristics of Plastic Pipe by Parallel-plate
Loading
|
|
D2447-03:
|
Specification for Polyethylene
(PE) Plastic Pipe Schedules 40 and 80, Based on Outside Diameter
|
|
D2513-2014e1:
|
Specification for Gas Pressure
Pipe, Tubing and Fittings
|
|
D2626/D2626M-04
(2012)e1:
|
Specification for
Asphalt-saturated and Coated Organic Felt Base Sheet Used in
Roofing
|
|
D2683-14:
|
Specification for Socket-type
Polyethylene Fittings for Outside Diameter-controlled Polyethylene Pipe and
Tubing
|
|
D2822/D2822M-05(2011)e1:
|
Specification for Asphalt Roof
Cement, Asbestos Containing
|
|
D2823/D2823M-05(2011)e1:
|
Specification for Asphalt Roof
Coatings, Asbestos Containing
|
|
D2824/D2824M-2013:
|
Specification for
Aluminum-pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered and
Fibered without Asbestos
|
|
D2898-10:
|
Test Methods for Accelerated
Weathering of Fire-retardant-treated Wood for Fire Testing
|
|
D3019-08:
|
Specification for Lap Cement
Used with Asphalt Roll Roofing, Nonfibered, Asbestos Fibered and Nonasbestos
Fibered
|
|
D3161/D3161M-15:
|
Test Method for Wind-Resistance
of Steep Slope Roofing Products (Fan Induced Method)
|
|
D3201/D3201M-2013:
|
Test Method for Hygroscopic
Properties of Fire-retardant Wood and Wood-base Products
|
|
D3309-96a(2002):
|
Specification for Polybutylene
(PB) Plastic Hot-and Cold-water Distribution System
|
|
D3350-14:
|
Specification for Polyethylene
Plastic Pipe and Fitting Materials
|
|
D3462/D3462M-10A:
|
Specification for Asphalt
Shingles Made From Glass Felt and Surfaced with Mineral Granules
|
|
D3468/D3468M-99(2013)E1:
|
Specification for
Liquid-applied Neoprene and Chlorosulfanated Polyethylene Used in Roofing and
Waterproofing
|
|
D3679-13:
|
Specification for Rigid Poly
(Vinyl Chloride) (PVC) Siding
|
|
D3737-2012:
|
Practice for Establishing
Allowable Properties for Structural Glued Laminated Timber
(Glulam)
|
|
D3747-79(2007):
|
Specification for Emulsified
Asphalt Adhesive for Adhering Roof Insulation
|
|
D3909/D3909M-14:
|
Specification for Asphalt Roll
Roofing (Glass Felt) Surfaced with Mineral Granules
|
|
D4022/D4022M-2007(2012)e1:
|
Specification for Coal Tar Roof
Cement, Asbestos Containing
|
|
D4318-10E1:
|
Test Methods for Liquid Limit,
Plastic Limit and Plasticity Index of Soils
|
|
D4434/D4434M-12:
|
Specification for Poly (Vinyl
Chloride) Sheet Roofing
|
|
D4479/D4479M-07(2012)e1:
|
Specification for Asphalt Roof
Coatings-asbestos-free
|
|
D4586/D4586M-07(2012)e1:
|
Specification for Asphalt Roof
Cemen-asbestos-free
|
|
D4601/D4601M-04(2012)e1:
|
Specification for
Asphalt-coated Glass Fiber Base Sheet Used in Roofing
|
|
D4637/D4637M-14E1:
|
Specification for EPDM Sheet
Used in Single-ply Roof Membrane
|
|
D4829-11:
|
Test Method for Expansion Index
of Soils
|
|
D4869/D4869M-15:
|
Specification for
Asphalt-saturated (Organic Felt) Underlayment Used in Steep Slope
Roofing
|
|
D4897/D4897M-01(2009):
|
Specification for Asphalt
Coated Glass-fiber Venting Base Sheet Used in Roofing
|
|
D4990-1997a(2013):
|
Specification for Coal Tar
Glass Felt Used in Roofing and Waterproofing
|
|
D5019-07a:
|
Specification for Reinforced
Nonvulcanized Polymeric Sheet Used in Roofing Membrane
|
|
D5055-13E1:
|
Specification for Establishing
and Monitoring Structural Capacities of Prefabricated Wood
I-joists
|
|
D5456-14B:
|
Standard Specification for
Evaluation of Structural Composite Lumber Products
|
|
D5516-09:
|
Test Method for Evaluating the
Flexural Properties of Fire-retardant-treated Softwood Plywood Exposed to the
Elevated Temperatures
|
|
D5643/D5643M-06(2012)e1:
|
Specification for Coal Tar Roof
Cement Asbestos-free
|
|
D5664-10:
|
Test Methods For Evaluating the
Effects of Fire-retardant Treatments and Elevated Temperatures on Strength
Properties of Fire-retardant-treated Lumber
|
|
D5665/D5665M-99a(2014)E1:
|
Specification for Thermoplastic
Fabrics Used in Cold-applied Roofing and Waterproofing
|
|
D5726-98(2013):
|
Specification for Thermoplastic
Fabrics Used in Hot-applied Roofing and Waterproofing
|
|
D6083-05e01:
|
Specification for
Liquid-applied Acrylic Coating Used in Roofing
|
|
D6162/D6162M-2000a(2015)E1:
|
Specification for Styrene
Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination
of Polyester and Glass Fiber Reinforcements
|
|
D6163/D6163M-2000(2015)E1:
|
Specification for Styrene
Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber
Reinforcements
|
|
D6164/D6164M-11:
|
Specification for Styrene
Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester
Reinforcements
|
|
D6222/D6222M-11:
|
Specification for Atactic
Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester
Reinforcements
|
|
D6223/D6223M-02(2009)E1:
|
Specification for Atactic
Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of
Polyester and Glass Fiber Reinforcement
|
|
D6298-13:
|
Specification for
Fiberglass-reinforced Styrene Butadiene Styrene (SBS) Modified Bituminous
Sheets with a Factory Applied Metal Surface
|
|
D6305-08(2015)E1:
|
Practice for Calculating
Bending Strength Design Adjustment Factors for Fire-retardant-treated Plywood
Roof Sheathing
|
|
D6380/D6380-03(2013)E1:
|
Standard Specification for
Asphalt Roll Roofing (Organic Felt)
|
|
D6464-03a(2009)e1:
|
Standard Specification for
Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood
Framing
|
|
D6694/D6694M-08(2013)E1:
|
Standard Specification for
Liquid-applied Silicone Coating Used in Spray Polyurethane Foam Roofing
Systems
|
|
D6754/D6754M-10:
|
Standard Specification for
Ketone-ethylene-ester-based Sheet Roofing
|
|
D6757-2013:
|
Specification for Underlayment
Felt Containing Inorganic Fibers Used with Steep Slope Roofing
|
|
D6841-08:
|
Standard Practice for
Calculating Design Value Treatment Adjustment Factors for
Fire-retardant-treated Lumber
|
|
D6878/D6878M-13:
|
Standard Specification for
Thermoplastic-polyolefin-based Sheet Roofing
|
|
D6947/D6947M-07(2013)E1:
|
Standard Specification for
Liquid Applied
Moisture Cured Polyurethane
Coating Used in
Spray
Polyurethane Foam Roofing
System
|
|
D7032-14:
|
Standard Specification for
Establishing Performance Ratings for Wood-plastic Composite Deck Boards and
Guardrail Systems (Guards or Handrails)
|
|
D7158-D7158M-2016:
|
Standard Test Method for Wind
Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance
Method)
|
|
D7254-15:
|
Standard Specification for
Polypropylene (PP) siding
|
|
D7425/D7425M-13:
|
Standard Specification for
Spray Polyurethane Foam Used for Roofing Application
|
|
D7672-14:
|
Standard Specification for
Evaluating Structural Capacities of Rim Board Products and
Assemblies
|
|
D7793-13:
|
Standard Specification for
Insulated Vinyl Siding
|
|
E84-2016:
|
Standard Test Method for
Surface Burning Characteristics of Building Materials
|
|
E96/E96M-2015:
|
Test Method for Water Vapor
Transmission of Materials
|
|
E108-2016:
|
Test Methods for Fire Tests of
Roof Coverings
|
|
E119-2016:
|
Test Methods for Fire Tests of
Building Construction and Materials
|
|
E136-2016:
|
Test Method for Behavior of
Materials in a Vertical Tube Furnace at 750°C
|
|
E283-04(2012):
|
Test Method for Determining the
Rate of Air Leakage through Exterior Windows, Curtain Walls and Doors Under
Specified Pressure Differences across the Specimen
|
|
E330/E330M-14:
|
Test Method for Structural
Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air
Pressure Difference
|
|
E331-00(2009):
|
Test Method for Water
Penetration of Exterior Windows, Skylights, Doors and Curtain Walls by Uniform
Static Air Pressure Difference
|
|
E779-10:
|
Standard Test Method for
Determining Air Leakage Rate by Fan Pressurization
|
|
E814-2013A:
|
Standard Test Method for Fire
Tests of Penetration Firestop Systems
|
|
E970-14:
|
Standard Test Method for
Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat
Energy Source
|
|
E1509-12:
|
Standard Specification for Room
Heaters, Pellet Fuel-burning Type
|
|
E1602-03(2010)e1:
|
Guide for Construction of Solid
Fuel Burning Masonry Heaters
|
|
E1827-11:
|
Standard Test Methods for
Determining Airtightness of Building Using an Orifice Blower Door
|
|
E1886-13A:
|
Test Method for Performance
Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure
Differentials
|
|
E1996-2014a:
|
Standard Specification for
Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective
Systems Impacted by Windborne Debris in Hurricanes
|
|
E2178-2013:
|
Standard Test Method for Air
Permeance of Building Materials
|
|
E2231-15:
|
Standard Practice for Specimen
Preparation and Mounting of Pipe and Duct Insulation Materials to Assess
Surface Burning Characteristics
|
|
E2273-03(2011):
|
Standard Test Method for
Determining the Drainage Efficiency of Exterior Insulation and Finish Systems
(EIFS) Clad Wall Assemblies
|
|
E2568-09e1:
|
Standard Specification for PB
Exterior Insulation and Finish Systems
|
|
E2570/E2570M-07(2014)E1:
|
Standard Test Methods for
Evaluating Water-resistive Barrier (WRB) Coatings Used Under Exterior
Insulation and Finish Systems (EIFS) or EIFS with Drainage
|
|
E2634-11(2015):
|
Standard Specification for Flat
Wall Insulating Concrete Form (ICF) Systems
|
|
F844-07a(2013):
|
Standard Specification for
Washers, Steel, Plain (Flat), Unhardened for General Use
|
|
F876-15A:
|
Specification for Cross-linked
Polyethylene (PEX) Tubing
|
|
F877-2011A:
|
Specification for Cross-linked
Polyethylene (PEX) Plastic Hot- and Cold-water Distribution
Systems
|
|
F1055-13:
|
Specification for Electrofusion
Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and
Crosslinked Polyethylene Pipe and Tubing
|
|
F1281-11:
|
Specification for Cross-linked
Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Pressure
Pipe
|
|
F1282-10:
|
Specification for
Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite
Pressure Pipe
|
|
F1554-15:
|
Specification for Anchor Bolts,
Steel, 36, 55 and 105-ksi Yield Strength
|
|
F1667-15:
|
Specification for Driven
Fasteners, Nails, Spikes and Staples
|
|
F1807-15:
|
Specification for Metal Insert
Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX)
Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
|
|
F1924-12:
|
Standard Specification for
Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene
Gas Distribution Pipe and Tubing
|
|
F1960-15:
|
Specification for Cold
Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked
Polyethylene (PEX) Tubing
|
|
F1970-12E1:
|
Standard Specification for
Special Engineered Fittings, Appurtenances or Valves for Use in Poly (Vinyl
Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)
Systems
|
|
F1973-13E1:
|
Standard Specification for
Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE)
and Polyamide 11 (PA 11) Fuel Gas Distribution Systems
|
|
F 2090-17:
|
Specification for Window Fall
Prevention Devices with Emergency Escape (Egress) Release
Mechanisms
|
|
F2098-08:
|
Standard Specification for
Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing
to Metal Insert and Plastic Insert Fittings
|
|
F2389-15:
|
Standard for Pressure-rated
Polypropylene (PP) Piping Systems
|
|
F2623-14:
|
Standard Specification for
Polyethylene of Raised Temperature (PE-RT) SDRG Tubing
|
|
F2735-09:
|
Standard Specification for
Plastic Insert Fittings for SDR9 Cross-linked Polyethylene (PEX) and
Polyethylene of Raised Temperature (PE-RT) Tubing
|
|
F2769-14:
|
Polyethylene or Raised
Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution
Systems
|
|
F2806-10(2015):
|
Standard Specification for
Acrylonitrile-butadiene-styrene (ABS) Plastic Pipe (Metric SDR-PR)
|
|
F2945-2015:
|
Standard Specification for
Polyamide 11 Gas Pressure Pipe, Tubing and Fittings
|
|
F2969-12:
|
Standard Specification for
Acrylonitrile-butadiene-styrene (ABS) IPS Dimensioned Pressure
Pipe
|
|
UL
|
UL LLC
333 Pfingsten Road
Northbrook, IL
60062
|
|
Standard
referenced
|
Title
|
|
17-2008:
|
Vent or Chimney Connector
Dampers for Oil-fired Appliances-with revisions through September
2013
|
|
55A-04:
|
Materials for Built-up Roof
Coverings
|
|
58-96:
|
Steel Underground Tanks for
Flammable and Combustible Liquids-with Revisions through July 1998
|
|
80-2007:
|
Steel Tanks for Oil-burner
Fuel- with revisions through January 2014
|
|
103-2010:
|
Factory-built Chimneys for
Residential Type and Building Heating Appliances- with revisions through July
2012
|
|
127-2011:
|
Factory-built Fireplaces- with
revisions through May 2015
|
|
174-04:
|
Household Electric Storage Tank
Water Heaters- with revisions through April 2015
|
|
180-2012:
|
Liquid-level Indicating Gauges
for Oil Burner Fuels and Other Combustible Liquids
|
|
181-05:
|
Factory-made Air Ducts and Air
Connectors-with revisions through May 2003
|
|
181A-2013:
|
Closure Systems for Use with
Rigid Air Ducts and
Air Connectors-
with revisions through December
1998
|
|
181B-2013:
|
Closure Systems for Use with
Flexible Air Ducts and
Air Connectors-
with revisions through August
2003
|
|
217-06:
|
Single- and Multiple-station
Smoke Alarms- with revisions through October 2015
|
|
263-2011:
|
Standards for Fire Test of
Building Construction and Materials-with revisions through June
2015
|
|
268-2009:
|
Smoke Detectors for Fire Alarm
Systems
|
|
325-02:
|
Door, Drapery, Gate, Louver and
Window Operations and Systems-with revisions through May 2015
|
|
343-2008:
|
Pumps for Oil-burning
Appliances- with revisions through June 2013
|
|
378-06:
|
Draft Equipment-with revisions
through June 12, 2014
|
|
441-10:
|
Gas Vents-with revisions
through June 12, 2014
|
|
507-99:
|
Standard for Electric
Fans
|
|
508-99:
|
Industrial Control
Equipment-with revisions through October 2013
|
|
515-11:
|
Electrical Resistance Heat
Tracing for Commercial and Industrial Applications Including Revisions through
July 2015
|
|
536-97:
|
Flexible Metallic Hose-with
revisions through December 2014
|
|
641-2010:
|
Type L, Low-temperature Venting
Systems-with revisions through June 2013
|
|
651-2011:
|
Schedule 40 and Schedule 80
Rigid PVC Conduit and Fittings-with revisions through May 2014
|
|
705-04:
|
Standard for Power
Ventilators-with revisions through December 2013
|
|
723-08:
|
Standard for Test for Surface
Burning Characteristics of Building Materials-with revisions through August
2013
|
|
726-95:
|
Oil-fired Boiler Assemblies-
with revisions through October 2013
|
|
727-06:
|
Oil-fired Central Furnaces-
with revisions through October 2013
|
|
729-03:
|
Oil-fired Floor Furnaces- with
revisions through October 2013
|
|
730-03:
|
Oil-fired Wall Furnaces-with
revisions through October 2013
|
|
732-95:
|
Oil-fired Storage Tank Water
Heaters- with revisions through October 2013
|
|
737-2011:
|
Fireplaces Stoves-with
revisions through August 2015
|
|
790-04:
|
Standard Test Methods for Fire
Tests of Roof Coverings-with revisions through July 2014
|
|
795-2011:
|
Commercial-industrial Gas
Heating Equipment- with revisions through November 2013
|
|
834-04:
|
Heating, Water Supply and Power
Boilers- Electric-with revisions through December 2013
|
|
842-07:
|
Valves for Flammable Fluids-
with revisions through May 2015
|
|
858-05:
|
Household Electric Ranges- with
revisions through June 2015
|
|
875-09:
|
Electric Dry-bath Heaters-with
revisions through December 2013
|
|
896-93:
|
Oil-burning Stoves-with
revisions through November 2013
|
|
923-2013:
|
Microwave Cooking Appliances-
with revisions through June 2015
|
|
959-2010:
|
Medium Heat Appliance
Factory-built Chimneys-with revisions through June 2014
|
|
1026-2012:
|
Electric Household Cooking and
Food Serving Appliances-with revisions through August 2015
|
|
1040-96:
|
Fire Test of Insulated Wall
Construction- with revisions through October 2012
|
|
1042-2009:
|
Electric Baseboard Heating
Equipment-with revisions through September 2014
|
|
1256-02:
|
Fire Test of Roof Deck
Construction- with revisions through July 2013
|
|
1261-01:
|
Electric Water Heaters for
Pools and Tubs- with revisions through July 2012
|
|
1479-03:
|
Fire Tests of
Through-Penetration Firestops- with revisions through June 2015
|
|
1482-2011:
|
Solid-Fuel-type Room Heaters-
with revisions through August 2015
|
|
1563-2009:
|
Standard for Electric Spas, Hot
Tubs and Associated Equipment-with revisions through March 2015
|
|
1618-09:
|
Wall Protectors, Floor
Protectors, and Hearth Extensions-with revisions through October
2015
|
|
1693-2010:
|
Electric Radiant Heating Panels
and Heating Panel Sets-with revisions through October 2011
|
|
1703-02:
|
Flat-plate Photovoltaic Modules
and Panels- with revisions through October 2015
|
|
1715-97:
|
Fire Test of Interior Finish
Material- with revisions through January 2013
|
|
1738-2010:
|
Venting Systems for Gas-burning
Appliances,
Categories II, III and IV-with
revisions through November 2014
|
|
1741-2010:
|
Inverters, Converters,
Controllers and Interconnection System Equipment with Distributed Energy
Resources- with revisions through January 2015
|
|
1777-07:
|
Chimney Liners-with revisions
through October 2015
|
|
1897-12:
|
Uplift Tests for Roof Covering
Systems- with revisions through September 2015
|
|
1995-2011:
|
Heating and Cooling Equipment-
with revisions through July 2015
|
|
1996-2009:
|
Electric Duct Heaters- with
revisions through June 2014
|
|
2034-08:
|
Standard for Single- and
Multiple-station Carbon Monoxide Alarms-with revisions through March
2015
|
|
2075-2013:
|
Standard for Gas and Vapor
Detectors and Sensors
|
|
2158A-2010:
2200-15
|
Outline of Investigation for
Clothes Dryer Transition Duct Stationary engine generator
assemblies
|
|
2523-09:
|
Standard for Solid Fuel-fired
Hydronic Heating Appliances, Water Heaters and Boilers- with revisions through
February 2013
|
|
2703-14:
|
Mounting Systems, Mounting
Devices, Clamping/Retention Devices and Ground Lugs for Use with Flat-Plate
Photovoltaic Modules and Panels
|
|
9540-14:
|
Outline of Investigation for
Energy Storage Systems and Equipment
|
|
UL/CSA/ANCE
|
Standard for Household and
Similar Electrical
|
|
60335-2-40-2012:
|
Appliances, Part
2:
Particular Requirements for
Motor-compressors
|
