Ohio Admin. Code 901:11-4-07 - Weighing
(A) The weigher, sampler, or tester
shall:
(1) Prior to measuring, allow the
milk to become motionless;
(2) Measure the
milk:
(a) When the measuring device is a
measuring stick, dry the stick at the milk level with a clean single-service
paper towel and make the measurement; or
(b) When the measuring stick is
outside the farm bulk milk tank, sanitize the stick with a chemical sanitizing
solution, dry the stick at the milk level with a clean single-service paper
towel and make the measurement; or
(c) When the measuring device is an
external gauge assembly and the gauge tube is filled with milk when the
weigher, sampler, or tester arrives at the farm, the gauge tube must be emptied
and refilled with cold milk and measured;
(3) Repeat the measuring procedure
until two identical measurements are taken and;
(4) Record the measurement results
on the weight ticket.
(B) A legible record of the weight
or volume of bulk tank milk collected from the farm, shall be left for the
producer after each pickup, and shall include all of the
following:
(1) Producer's route and patron
number or applicable identification;
(2) Date of pickup;
(3) Time of pickup;
(4) Temperature of the milk at the
time of pickup;
(5) Weigher, sampler, or tester's
name and license number; and
(6) Weight or volume of milk
collected.
Notes
Promulgated Under: 119.03
Statutory Authority: 917.02
Rule Amplifies: 917.02
Prior Effective Dates: 11/18/2002, 06/06/2005, 05/15/2007
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.