Division 225 - BOILERS AND PRESSURE VESSELS

  1. § 918-225-0220 - [Repealed]
  2. § 918-225-0240 - Definitions
  3. § 918-225-0300 - Fired Water Heaters
  4. § 918-225-0310 - Exemptions for Refrigerant Piping Systems
  5. § 918-225-0315 - Exemptions for Process Piping Systems
  6. § 918-225-0320 - Refrigerant or Air Conditioning Pressure Vessels
  7. § 918-225-0330 - Exemption of Unfired Pressure Vessels with an Inside Diameter of Six Inches and Less
  8. § 918-225-0340 - Pressure Containing Parts of Piping Components
  9. § 918-225-0345 - [Repealed]
  10. § 918-225-0350 - Exemptions for Hot Water Storage Tanks
  11. § 918-225-0360 - Exemption of Certain Pressure Vessels
  12. § 918-225-0365 - Exemption of Certain Miniature Boilers
  13. § 918-225-0370 - Coil-Type Water Boilers
  14. § 918-225-0380 - Refrigeration Chillers
  15. § 918-225-0390 - [Repealed]
  16. § 918-225-0400 - [Repealed]
  17. § 918-225-0430 - Adopted Oregon Boiler and Pressure Vessel Specialty Code
  18. § 918-225-0435 - Amendments to the Oregon Boiler and Pressure Vessel Specialty Code
  19. § 918-225-0445 - Other Installation Standards
  20. § 918-225-0450 - Manufacturer's Data Reports
  21. § 918-225-0460 - Reporting of Accidents and Conditions of Use
  22. § 918-225-0465 - Boiler Room Usage
  23. § 918-225-0470 - Boiler Operation
  24. § 918-225-0510 - Installation of Buried Vessels
  25. § 918-225-0540 - Scope of Special Inspector's Authority
  26. § 918-225-0560 - Responsibility of Inspectors
  27. § 918-225-0562 - Process Piping Inspector Responsibilities
  28. § 918-225-0565 - Reporting of Immediate Hazards to Health or Safety
  29. § 918-225-0570 - Boiler and Pressure Vessel Inspection Schedules
  30. § 918-225-0590 - Inspection Cycle Extension Program
  31. § 918-225-0600 - Permits
  32. § 918-225-0606 - Issuance and Purchase of Minor Repair Permits
  33. § 918-225-0609 - Use of Minor Repair Permits
  34. § 918-225-0612 - Scope of Work Allowed under Minor Repair Permit
  35. § 918-225-0615 - Inspection of Minor Repair Permits
  36. § 918-225-0618 - Misuse of Minor Repair Permits
  37. § 918-225-0620 - Bulk Rate Permits
  38. § 918-225-0630 - Special Fee for Dryer Permits
  39. § 918-225-0640 - Business and Trade License Fees
  40. § 918-225-0650 - Practical Experience Requirement
  41. § 918-225-0660 - Certification of Special Inspectors
  42. § 918-225-0665 - Certification of Process Piping Inspectors
  43. § 918-225-0670 - Fees for Inspector Examination, Certification and Renewal
  44. § 918-225-0691 - Boiler, Pressure Vessel and Pressure Piping Installation, Alteration or Repair Licensing Requirements
  45. § 918-225-0700 - Responsibility of Boiler Contractors
  46. § 918-225-0720 - Welding Requirements for Owner-Users
  47. § 918-225-0730 - Requirements for Businesses Doing Welding or Brazing
  48. § 918-225-0740 - Quality Control System for Pressure Piping; Oregon "O" Certificate of Authorization
  49. § 918-225-0745 - Contractor Registration
  50. § 918-225-0780 - Filing of Insurance Notices
  51. § 918-225-0800 - Reporting of Immediate Hazards to Health or Safety

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.