25 Pa. Code § 109.612 - POE devices
(a) POE devices
may be approved by the Department for use only by a public water supplier
serving 100 or fewer individuals for the treatment of sources permitted prior
to May 16, 1992.
(b) POE devices or
components used by a public water supplier shall be tested and certified by the
NSF or other certification organization acceptable to the Department against
ANSI/NSF standards established for drinking water treatment devices. To be
acceptable to the Department a certification organization other than NSF shall
have a program at least as stringent as the NSF program and meet the
requirements under §
109.606(e)
(relating to chemicals, materials and equipment) as applicable to ANSI/NSF
standards for drinking water treatment devices.
(c) A public water supplier using POE devices
as a means of treatment shall install a POE device on the service line to
customers, except for customers who are provided with water that meets the
requirements of Subchapter B (relating to MCLs, MRDLs or treatment technique
requirements) without the use of a POE device.
(d) The design, installation and operation of
a POE device shall be of a type that the microbiological safety of the water is
maintained.
Notes
The provisions of this § 109.612 amended under section 4(a) of the Pennsylvania Safe Drinking Water Act (35 P.S. § 721.4(a)); and section 1920-A(b) of The Administrative Code of 1929 (71 P.S. § 510-20(b)).
This section cited in 25 Pa. Code § 109.503 (relating to public water system constuction permits).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.