25 Pa. Code § 281.216 - Operations
(a) The approach
and unloading area shall be adequate in size and design to facilitate the rapid
unloading of solid waste from collection vehicles and the unobstructed
maneuvering of the vehicles and other equipment.
(b) The unloading and storage areas shall be
constructed of impervious material which is capable of being cleaned by high
pressure water spray and shall be equipped with drains or sumps connected to a
sanitary sewer system or treatment facility to facilitate the removal of
water.
(c) An attendant or clearly
marked signs shall direct vehicles to the unloading area.
(d) The operator shall ensure that collection
vehicles unload waste promptly in unloading areas.
(e) Solid waste shall be confined to the
unloading area or a storage area approved as part of the operator's
permit.
(f) If bulky waste is
handled or processed at the facility, the operator shall remove the waste daily
or take other action sufficient to prevent nuisances or
unsightliness.
(g) The operator
shall maintain sufficient distance between windrows or piles to allow the
proper use of equipment during the deposit, removal and turning of the
compost.
(h) The operator shall
inspect the facility daily to detect hot spots in a storage or composting area,
dust accumulation, vectors, litter and other problems, and promptly take
necessary corrective actions.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.