34 Pa. Code § 3a.166 - Miniature boilers and kitchen equipment
(a) A miniature boiler must be manufactured
under the ASME "S," "H" or "M" Code. A boiler manufactured under ASME "S" and
"H" Code must be stamped with a National Board registration number.
(b) Clearance requirements contained in
§
3a.36 (relating to clearances) do
not govern a miniature boiler or kitchen equipment if all pressure containing
parts with appurtenances are visible for inspection.
(c) Miniature boiler controls must comply
with ASME/CSD1.
(d) The sight glass
and pressure gauge of a miniature boiler installed in a cabinet must always be
visible during operation.
(e)
Discharge from safety valves must be piped to a safe point.
(f) Burners for gas-fired installations must
be AGA approved.
(g) Inspection of
miniature boilers and kitchen equipment shall be performed in accordance with
§
3a.111(1)-(6)
(relating to field inspections).
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.