34 Pa. Code § 47.164 - Lighting and heating
(a)
Lighting. The lighting of foundries shall conform to the
requirements of Chapter 27 (relating to lighting).
(b)
Heating. Proper and
sufficient heat shall be provided and maintained in each foundry. Open fires
may be used for the drying of molds or cores if coke containing less than 1% of
sulphur is used. Also charcoal, gas or oils may be so used. If practicable,
such drying of molds or cores shall be done at night.
(c)
Drying of ladles. All
hand and bull ladles shall be dried in ovens or outside of the foundry. A
sufficient number of sheet-iron shields shall be available in iron foundries
for use in covering hand and bull ladles.
(d)
Clothes of employes.
Suitable facilities shall be provided for the thorough drying of the clothing
of employes. The facilities may be located in the washroom, the locker room or
in a room used exclusively for this purpose.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.