49 Pa. Code § 37.58 - Seal

(a) A registrant shall obtain, at the registrant's own expense, a seal in the design authorized by the Board. The following are Board authorized seals for "Registered Professional Engineer" (Design A), "Registered Professional Land Surveyor" (Design B) and "Registered Professional Geologist" (Design C):

Click to view image

(b) The seal shall contain the legend "Registered Professional Engineer," "Registered Professional Land Surveyor" or "Registered Professional Geologist" and the registrant's name and registration number.

(c) The seal shall be 1 3/4 inch in diameter. The diameter of a pocket seal may be reduced to 1 1/2 inch if the design is in the same relative proportions in subsection (a).

(d) A registrant may use a rubber stamp or computer image which is a facsimile of the seal, if the registrant first obtains a seal in accordance with this section.

Notes

49 Pa. Code § 37.58

The provisions of this § 37.58 adopted January 21, 1994, effective 1/22/1994, 24 Pa.B. 518; amended October 25, 1996, effective 10/26/1996, 26 Pa.B. 5106.

This section cited in 49 Pa. Code § 37.20a (relating to provisional endorsement license).