67 Pa. Code § 175.263 - Sun screening location
(a)
Windshields, side windows and side wings. A person may not
operate, on a highway, a motor vehicle with a front windshield, side window or
side wing that has been equipped with a sun screening device or other material
which does not permit a person to see or view the inside of the vehicle. This
subchapter does not prohibit the use of products or materials along the top
edge of the windshield if the products or materials are transparent and do not
encroach upon the AS-1 portion of the windshield as provided by FMVSS No. 205
and if the devices or materials are not more than 3 inches from the top of the
windshield.
(b)
Rear
window. The rear window on a motor vehicle may be treated by the
vehicle owner with a sun screening device or other material. If the rear window
is treated with a sun screening device or other material, the vehicle shall
comply with §
175.264 (relating to mirrors). See
Table X for specific requirements for vehicles subject to this
subchapter.
(c)
Louvered
materials. Louvered materials may not reduce the area of driver
visibility below 50% as measured on a horizontal plane.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.