TABLE V - LOCATION OF REQUIRED EQUIPMENT

MOTORCYCLES

ITEM LOCATION ON MOTORCYCLES Height above road surface measured from center of item on vehicle
Turn Signal Lamps At or near the front 1 amber on each side of the vertical centerline at the same height, and having a minimum horizontal separation distance (centerline of lamps) of 16". Minimum edge to edge separation distance between lamp and headlamp is 4". Not less than 15" nor more than 83"
At or near the rear 1 red or amber on each side of the vertical centerline, at the same height and having a minimum horizontal separation distance (centerline to centerline of lamps) of 9". Minimum edge to edge separation distance between lamp and tail or stop lamp is 4".

Notes

The provisions of this Table V readopted December 2, 1988, effective 12/3/1988, 18 Pa.B. 5362

This table cited in 67 Pa. Code § 175.146 (relating to lighting and electrical systems); 67 Pa. Code § 175.160 (relating to inspection procedure); 67 Pa. Code § 175.175 (relating to lighting and electrical systems); and 67 Pa. Code § 175.190 (relating to inspection procedure).

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.