S.C. Code Regs. 8-609 - Change in Status, Alterations
(1) Changes to approved plans.
(a) If the manufacturer proposes to change
any portion of its system or model designs, or if the Council regulations are
amended to necessitate such change, it shall be required to submit to the
Council, through its approved inspection agency; three (3) sets of detailed,
supplemental plans. Plans shall be accompanied by a transmittal of
supplementary plan application form, obtainable from the Council and the
appropriate plan filing fee.
(b) A
model name or designation may be changed or added prior to the expiration date
by filing an amended application.
(c) If the manufacturer proposes changes in
the quality control manual or procedures, three (3) copies of the changes shall
be submitted to the Council through the approved inspection agency.
(2) Change of name, address, or
ownership. In the event of a change of name, address, or ownership of a modular
building manufacturer, the owner, or an officer shall notify the Council in
writing within ten (10) days of such change.
(3) Discontinuance of manufacturer. When a
manufacturer discontinues an approved model, the manufacturer shall, within ten
(10) days, advise the Council of the date of the discontinuance and return all
certification labels allocated to the model.
(4) Existing model approvals. In the event of
amendment of these regulations or the building codes referenced herein, which
will require changes to an approved model design, the Council shall notify the
manufacturer of such changes, and shall allow the manufacturer ninety (90) days
from the date of such notification, or such additional time as the Council
shall deem reasonable, in which to submit revised plans for model
approval.
(5) Revised model plans
submitted pursuant to this section shall be processed as a supplemental detail,
with appropriate fees.
(6)
Alteration or conversion. Any unauthorized alteration or conversation made to
an approved modular building prior to initial erection shall void the approval.
The state certification label(s) affixed to the building shall be returned to
or be confiscated by the Council.
(7) Any alteration or conversion made to an
approved modular building after initial erection shall void the approval and
certification label, and, be subject to the provisions of the building
inspection program for the jurisdiction in which it is located.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.