30 Tex. Admin. Code § 115.234 - Inspection Requirements
(a) No person in the Beaumont/Port Arthur, Dallas/Fort Worth, El Paso, and Houston/Galveston areas, as defined in §
115.10 of this title (relating to Definitions), shall allow a tank-truck tank to be filled with or emptied of gasoline at any facility subject to §
115.214(a)(1)(C) or §
115.224(2) of this title (relating to Inspection Requirements), or filled with non-gasoline volatile organic compounds (VOC) having a true vapor pressure greater than or equal to 0.5 pounds per square inch absolute under actual storage conditions at any facility subject to §
115.214(a)(1)(C) of this title, unless the tank-truck tank has passed a leak-tight test within the past year as evidenced by a prominently displayed certification affixed near the United States Department of Transportation certification plate which:
(1) shows the date the tank-truck tank last passed the leak-tight test required by §
115.235 of this title (relating to Approved Test Methods); and
(2) shows the identification number of the tank-truck tank.
(b) No person in the covered attainment counties, as defined in §
115.10 of this title, shall allow a gasoline tank-truck tank to be filled or emptied at any facility subject to §
115.214(b)(1)(C) or §
115.224(2) of this title unless the tank-truck tank has passed a leak-tight test within the past year as evidenced by a prominently displayed certification affixed near the United States Department of Transportation certification plate which:
(1) shows the date the gasoline tank-truck tank last passed the leak-tight test required by §
115.235 of this title; and
(2) shows the identification number of the tank-truck tank.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.