34 Tex. Admin. Code § 19.32 - Energy and Water Conservation Design Standards
(a) SECO adopts by reference the following
minimum energy standards for state agencies and institutions of higher
education:
(1) for any new construction or
major renovation project, except low-rise residential buildings, with a design
assignment made on or after January 1, 2021, the energy conservation design
standard of the American National Standards Institute (ANSI)/American Society
of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE)/Illuminating
Engineering Society (IES) Standard 90.1-2016 Energy Standard for Buildings
Except Low-Rise Residential Buildings, and any errata sheet for 90.1-2016 that
is published by the ASHRAE Standards Committee or the 2018 International Energy
Conservation Code (IECC) as published by the International Code Council (ICC),
provided however the following buildings or structures are exempt from
compliance with this section:
(A) a building
or structure that is listed in the State or National Register of Historic
Places;
(B) a building or structure
that is designated as a historic property under local or state designation law
or survey;
(C) a building or
structure that is certified as a contributing resource with a National Register
listed or locally designated historic district; or
(D) with an opinion or certification by the
State Historic Preservation Officer or Keeper of the National Register of
Historic Places, a building or structure that is eligible to be listed on the
National or State Registers of Historic Places either individually or as a
contributing building to a historic district;
(2) for any new construction or major
renovation project of a low-rise residential building with a design assignment
made on or after January 1, 2021, the residential chapter of the 2018
International Energy Conservation Code as published by the International Code
Council.
(b) Effective
January 1, 2021, SECO adopts by reference the "Water Conservation Design
Standards for State Buildings and Institutions of Higher Education Facilities"
prepared by SECO, dated April 2020, as the water conservation design standards
for any new construction or major renovation project.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.